An improved three-coil wireless power link to increase spacing distance and power for magnetic resonant coupling system

被引：0
作者：
Zhang X. [1 ]
Meng H. [1 ]
Wei B. [2 ]
Wang S. [2 ]
Yang Q. [1 ]
机构：
[1] Tianjin Key Laboratory of Advanced Electrical Engineering and Energy Technology, Tianjin Polytechnic University, Tianjin
[2] China Electric Power Research Institute, Beijing
来源：
EURASIP Journal on Wireless Communications and Networking | / 2018卷 / 1期
关键词：
Coupled mode theory; Critical strong coupling; Magnetic resonant coupling; Optimal impedance feed; Three-coil wireless power link;
D O I：
10.1186/s13638-018-1148-8
中图分类号：
学科分类号：
摘要：
When wireless power transfer (WPT) technology is used to power the sensor networks, it is necessary to increase the transmission power and distance. We strictly deduced two necessary conditions for strong coupling by coupled mode theory. Next, the transmission power and efficiency as a function of coupling coefficient and quality factor are derived, and the maximum active power of the load depends on the coupling coefficient between resonators, quality factor of the resonator and the drive power. In order to increase transmission power and distance, an improved three-coil wireless power link is proposed. Meanwhile, an experimental platform was established, and the experimental results show that the transmission power can reach 120 W at a distance of 2.5 m. This proves that the improved three-coil wireless power link is very effective. © 2018, The Author(s).
引用
收藏
相关论文
共 19 条
  • [1] Kurs A., Karalis A., Moffatt R., Et al., Wireless power transfer via strongly coupled magnetic resonances, Science, 317, 5834, pp. 83-86, (2007)
  • [2] Nguyen V.T., Kang S.H., Choi J.H., Et al., Magnetic resonance wireless power transfer using three-coil system with single planar receiver for laptop applications, IEEE Trans. Consum. Electron., 61, 2, pp. 160-166, (2015)
  • [3] Zhang X., Yuan Z., Yang Q., Et al., Coil design and efficiency analysis for dynamic wireless charging system for electric vehicles, IEEE Trans. Magn., 52, 7, pp. 1-4, (2016)
  • [4] Moon S.C., Moon G.W., Wireless power transfer system with an asymmetric four-coil resonator for electric vehicle battery chargers, IEEE Trans. Power Electron., 31, 10, pp. 6844-6854, (2016)
  • [5] Zhang X., Zhang P., Yang Q., Et al., Magnetic shielding design and analysis for wireless charging coupler of electric vehicles based on finite element method, Transactions of China Electrotechnical Society, 31, 1, pp. 71-79, (2016)
  • [6] Ko Y.Y., Ho S.L., Fu W.N., Et al., A novel hybrid resonator for wireless power delivery in bio-implantable devices, IEEE Trans. Magn., 48, 11, pp. 4518-4521, (2012)
  • [7] Ahn D., Ghovanloo M., Optimal design of wireless power transmission links for millimeter-sized biomedical implants, IEEE Transactions on Biomedical Circuits and Systems, 10, 1, pp. 125-137, (2016)
  • [8] Yang Q., Zhang P., Zhu L., Et al., Key fundamental problems and technical bottlenecks of the wireless power transmission technology, Transactions of China Electrotechnical Society, 30, 5, pp. 1-8, (2015)
  • [9] Zhang X., Yuan Z., Zhang P., Et al., Transmitting capacity estimation and verification for wireless power transmission system via electromagnetic resonant coupling, Transactions of China Electrotechnical Society, 30, 19, pp. 47-54, (2015)
  • [10] Dong Y., Yu L., Li L., Et al., Resonance wireless power transmission technology theory and its applications in the micro-sensor, Microcomputer & Its Applications, 33, 3, pp. 1-4, (2014)
12