Advanced exergy analysis of a trigeneration system after multi-objective optimization by GAMS software

被引：0

作者：

Sina Ahmadi

Mohammad Mustafa Ghafurian

Hamid Niazmand

Omid Mahian

机构：

[1] Ferdowsi University of Mashhad,Mechanical Engineering Department, Faculty of Engineering

[2] Ferdowsi University of Mashhad,Center for Nanotechnologies in Renewable Energies

[3] Xi’an Jiaotong University,School of Chemical Engineering and Technology

来源：

Journal of Thermal Analysis and Calorimetry | 2023年 / 148卷

关键词：

Multi-purpose optimization; Advanced exergy; Trigeneration system;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

Due to the increment of energy demand, the current requirement for optimum design of a trigeneration system has become more imperative than ever. The present work deals with the simulation of the demand energy and optimization of a trigeneration system for a hotel building in Mashhad using GAMS software where four objective functions including energy, exergy, environment, and economy have been considered. The results indicate that the improvement of the objective functions was 30.88%, 30.90%, 30.76%, and 17.19%, respectively, compared to the traditional system. Lastly, advanced exergy analysis was performed on the trigeneration system to determine the amount and location of endogenous, exogenous, avoidable, and unavoidable irreversibility rates. The results elucidate that the gas engine has the highest potential in the efficiency improvement, followed by heat exchangers set, electrical chiller, absorption chiller, and gas boiler.

引用

页码：3555 / 3574

页数：19

共 107 条

[1]

Shakib SE(2021)New approaches to low production cost and low emissions through hybrid MED-TVC+RO desalination system coupled to a gas turbine J Clean Prod 86 89-106

[2]

Amidpour M(2018)New approach for estimating the cooling capacity of the absorption and compression chillers in a trigeneration system Int J Refrig 147 4303-4323

[3]

Boghrati M(2022)Exergetic, exergo-economic, and exergo-environmental analyses of a trigeneration system driven by biomass and natural gas J Therm Anal Calorim 145 887-907

[4]

Esmaieli A(2021)4E analysis and three-objective optimization for selection of the best prime mover in smart energy systems for residential applications: a comparison of four different scenarios J Therm Anal Calorim 51 2252-2259

[5]

Ghafurian M(2010)Thermodynamic and thermoeconomic analyses of a trigeneration (TRIGEN) system with a gas–diesel engine: part i–methodology Energy Convers Manage 51 2260-2271

[6]

Ghafurian MM(2010)Thermodynamic and thermoeconomic analyses of a trigeneration (TRIGEN) system with a gas–diesel engine: part ii–an application Energy Convers Manage 94 243-249

[7]

Niazmand H(2016)Thermodynamic boundaries of energy saving in conventional CCHP (Combined Cooling, Heating and Power) systems Energy 93 1228-1237

[8]

Jalili M(2016)Exergy-analysis based comparative study of absorption refrigeration and electric compression refrigeration in CCHP systems Appl Therm Eng 6 324-332

[9]

Ghasempour R(2015)Optimal smart home energy management considering energy saving and a comfortable lifestyle IEEE Trans Smart Grid 110 135-148

[10]

Ahmadi MH(2016)Optimal design and operation of district heating and cooling networks with CCHP systems in a residential complex Energy Build 108 680-688

← 1 2 3 4 5 6 7 8 9 10 →