Effect of prestrain on microstructure and mechanical behavior of aged Ti-10V-2Fe-3Al alloy

被引：0

作者：

Chen W. ^{[1
]}

Song Z. ^{[1
]}

Xiao L. ^{[1
]}

Sun Q. ^{[1
]}

Sun J. ^{[1
]}

Ge P. ^{[2
]}

机构：

[1] State Key Laboratory for Mechanical Behavior of Materials, Xi'an Jiaotong University

[2] Northwest Institute for Nonferrous Metal Research

来源：

Journal of Materials Research | 2009年 / 24卷 / 9期

基金：

中国国家自然科学基金;

关键词：

D O I：

10.1557/jmr.2009.0332

中图分类号：

学科分类号：

摘要：

The effect of prestrain on microstructure and mechanical behavior of aged Ti-10V-2Fe-3Al alloy was investigated. The results showed that prestrain caused the tensile strength to decrease by 5%, but the elongation to fracture significantly improved by about 200%, in comparison with the unstrained samples, using a much shorter aging time. Transmission electron microscopy investigations showed that nano-sized alpha (α) particles homogeneously precipitated in the beta (β) matrix, and continuous α films formed along grain boundaries in the unstrained and aged samples. However, in the prestrained samples, the coarse stress induced martensite laths decomposed into α- and β-phases in the form of alternately arranged plates, which suppressed formation of the continuous grain boundary α films during aging. The hardness of the prestrained samples was lower than that of the unstrained samples after the same aging treatments. The enhancement of ductility can be mainly attributed to the suppression of grain boundary a films and the reduced hardness in prestrained samples. © 2009 Materials Research Society.

引用

页码：2899 / 2908

页数：9

共 24 条

[1]

Boyer R.R., Kuhlman G.W., Processing properties relationships of Ti-10V-2Fe-3Al, Metall. Trans. A, 18, (1987)

[2]

Duerig T.W., Terlinde G.T., Williams J.C., Phase transformations and tensile properties of Ti-10V-2Fe-3Al, Metall. Trans. A, 11, (1980)

[3]

Terlinde G.T., Duerig T.W., Williams J.C., Microstructure, tensile deformation, and fracture in aged Ti-10V-2Fe-3Al, Metall. Trans. A, 14, (1983)

[4]

Chen C.C., Boyer R.R., Practical considerations for manufacturing high strength Ti-10V-2Fe-3Al forgings, JOM, 31, (1979)

[5]

Boyer R.R., Design properties of a high-strength titanium alloy Ti-10V-2Fe-3Al, JOM, 32, (1980)

[6]

Eylon D., Vassel A., Combres Y., Boyer R.R., Bania P.J., Schultz R.W., Issues in the development of beta titanium alloy, JOM, 46, (1994)

[7]

Boyer R.R., Applications of beta titanium alloys in airframes, Beta Titanium Alloys in the 1990's, (1993)

[8]

Rendigs K.H., Titanium products used at Airbus, The 10th World Conference on Titanium, (2003)

[9]

Duerig T.W., Williams J.C., Overview: Microstructure and properties of beta titanium alloy, Beta Titanium Alloys in the 1980's, (1984)

[10]

Balasubrahmanyam V.V., Prasad Y., Hot deformation mechanisms in metastable beta titanium alloy Ti-10V-2Fe-3Al, Mater. Sci. Technol., 17, (2001)

← 1 2 3 →