A study of heat transfer in the surface layer of metal during the impingement of a liquid jet

被引：0
作者：
A. V. Koldin
N. I. Platonov
机构：
[1] Magnitogorsk State University,
来源：
Thermal Engineering | 2008年 / 55卷 / 3期
关键词：
Heat Transfer; Metal Sheet; Critical Heat Flux; Boiling Heat Transfer; Impingement Zone;
D O I：
10.1007/s11509-008-3008-3
中图分类号：
学科分类号：
摘要：
We propose a model of heat transfer that takes place when a sheet of metal heated to a high temperature is cooled by a jet. The model takes into account transition and film boiling of liquid, as well as convective and radiant heat transfer in air medium. Examples are given illustrating how the temperature field of a movable metal sheet cooled by a system of jets is calculated.
引用
收藏
页码：223 / 227
页数：4
相关论文
共 30 条
[1]  
Bogachuk V N(1989)Interaction of an Axially Symmetrical Jet of Droplet Liquid with a Barrier under the Conditions of Cooling Systems Used in Internal Combustion Engines Promyshl. Teplotekhn. 11 7377-1360
[2]  
Novennikov A L(1989)Heat Transfer between a Circular Free Impinging Jet and a Solid Surface with Nonuniform Wall Temperature or Wall Heat Flux. 1. Solution for the Stagnation Region Int. J. Heat Mass Transfer 32 1351-1371
[3]  
Yudaev B N(1989)Heat Transfer between a Circular Free Impinging Jet and a Solid Surface with Nonuniform Wall Temperature or Wall Heat Flux. 2. Solution for the Boundary Layer Region Int. J. Heat Mass Transfer 32 1361-272
[4]  
Wang X S(1999)Numerical Simulation of Convective Transfer to Radial Free Surface Jet Impinging on a Hot Solid Heat and Mass Transfer 35 266-28
[5]  
Dagan Z(1980)Critical Heat Flux and Subcooled Nucleate Boiling in Transient Region between a Two-Dimensional Water Jet and a Heated Surface J. Chem. Eng. of Japan 13 22-564
[6]  
Jiji I M(1983)Numerical Analysis of Cooling Characteristics for Water Bar Trans. ISIJ 23 555-2481
[7]  
Wang X S(2001)Study on Boiling Heat Transfer for Water Jet Impinging on High Temperature Flat Plate,î Int. J. Heat Mass Transfer 44 2475-319
[8]  
Dagan Z(1976)Prediction of Strip Temperature for Hot Strip Mills Trans. ISIJ 16 11619-28
[9]  
Jiji I M(1992)Laminar Boundary Layer Model of Heat Transfer due to a Nonuniform Planar Jet Impinging on a Moving Plate Warm and Stoffurtragung 27 311-2673
[10]  
Fujimoto H(1980)The Effect of Pure Forced Convection on the Boiling Heat Transfer between a TwoDimensional Subcooled Water Jet and a Heated Surface J. Chem. Eng. of Japan 13 22-321
123