The role of contact friction in the dynamic breakage behavior of granular materials

Based on the discrete element method, a multi-scale model is employed to investigate the role of contact friction in the dynamic compression responses of brittle granular materials. Four numerical granular samples with different particle friction coefficients ranging from 0.0 to 2.0 are tested and the particle breakage extent is quantified with the Einav breakage index. It is observed that the relationship of the breakage extent with the axial stress is apparently non-monotonic concerning the particle friction coefficient. At the same stress level, the breakage extent exhibits a minimum when the particle friction coefficient is around 0.1 but increases significantly with the particle friction coefficient to both sides. The micro physical origin of this non-monotonic behavior is a distinct transition in dominant particle-breakage modes from tension to shear. Moreover, energy analyses also show non-monotonic evolution of the frictional and damping dissipation with the particle friction coefficient. The joint effect of these two dissipation terms contributes to the non-monotonic behavior of particle breakage. In addition, the accuracy and competence of two frequently-used micro quantities, fraction of sliding contacts and average coordination number, are discussed.