Experimental Verification of a Method of Detection of Crack in Taper and Segmented Beams Based on Modelling of Transverse Vibration

被引：3
|
作者：
T.D. Chaudhari
S.K. Maiti
机构：
[1] IIT Bombay,Department of Mechanical Engineering
[2] IIT Bombay,Department of Mechanical Engineering
来源：
International Journal of Fracture | 2000年 / 102卷 / 2期
关键词：
Differential Equation; Mechanical Engineer; Civil Engineer; Maximum Error; Cantilever Beam;
D O I：
10.1023/A:1007680215355
中图分类号：
学科分类号：
摘要：
In this note a method for prediction of location and size of a crack based on measurements of natural frequencies has been verified experimentally considering taper and segmented cantilever beam geometries. The analysis is based on the concept of a rotational spring to represent the crack section and the Frobenius method to solve differential equation with variable coefficients. The crack size is computed using a relation between stiffness and crack size. The maximum error in predicting the crack locations is 8%. The maximum error in predicting the crack size is 20%.
引用
收藏
页码：33 / 38
页数：5
相关论文
共 50 条
  • [21] Boundary element method based sensitivity analysis of the crack detection in beams
    Lee, Jinhee
    JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2015, 29 (09) : 3627 - 3634
  • [22] Modelling of the creep fatigue crack growth based on the calculation of the cavity configuration in front of the crack and its experimental verification
    Olfe, J
    Rie, KT
    LOW CYCLE FATIGUE AND ELASTO-PLASTIC BEHAVIOUR OF MATERIALS, 1998, : 591 - 596
  • [23] Inner crack detection method for cantilever beams
    Li, Zheng
    Zhang, Wei
    Li, Yixuan
    Su, Xianyue
    REVIEW OF PROGRESS IN QUANTITATIVE NONDESTRUCTIVE EVALUATION, VOL 27A AND 27B, 2008, 975 : 594 - 601
  • [24] FEM MODELLING AND EXPERIMENTAL VERIFICATION OF A ROTOR SYSTEM WITH A OPEN CRACK
    Inoue, Tsuyoshi
    Nagata, Nobuhiro
    Ishida, Yukio
    PROCEEDINGS OF THE ASME INTERNATIONAL DESIGN ENGINEERING TECHNICAL CONFERENCES AND COMPUTERS AND INFORMATION IN ENGINEERING CONFERENCE, VOL 1, PT B, 2010, : 1113 - 1122
  • [25] FEM modelling and experimental verification of a rotor system with a open crack
    Department of Mechanical Science and Engineering, Nagoya University, Furo-cho, Chikusa-ku, Nagoya-shi, Aichi, 464-8603, Japan
    Nihon Kikai Gakkai Ronbunshu C, 2009, 753 (1465-1472):
  • [26] Method of shaft crack detection based on squared gain of vibration amplitude
    Rafal Gradzki
    Zbigniew Kulesza
    Blazej Bartoszewicz
    Nonlinear Dynamics, 2019, 98 : 671 - 690
  • [27] Method of shaft crack detection based on squared gain of vibration amplitude
    Gradzki, Rafal
    Kulesza, Zbigniew
    Bartoszewicz, Blazej
    NONLINEAR DYNAMICS, 2019, 98 (01) : 671 - 690
  • [28] Vibration-Based Method for Damage Detection at Welded Beams and Rods
    Salgado Sanchez, P.
    Lopez Negro, P.
    Garcia-Fogeda, P.
    LATIN AMERICAN JOURNAL OF SOLIDS AND STRUCTURES, 2016, 13 (13): : 2336 - 2355
  • [29] Multiple scales analysis and DQM verification of transverse forced vibration of axially moving beams
    Ding, Hu
    Chen, Li-Qun
    Zhendong Gongcheng Xuebao/Journal of Vibration Engineering, 2009, 22 (03): : 298 - 304
  • [30] Thermal-vibration method of crack detection
    Staroselsky, A
    Cassenti, BN
    INTERNATIONAL JOURNAL OF FRACTURE, 2002, 116 (02) : L35 - L40
12345