Integrated active sensor system for real time vibration monitoring

被引:0
作者
Qijie Liang
Xiaoqin Yan
Xinqin Liao
Shiyao Cao
Shengnan Lu
Xin Zheng
Yue Zhang
机构
[1] State Key Laboratory for Advanced Metals and Materials,
[2] School of Materials Science and Engineering,undefined
[3] University of science and technology Beijing,undefined
[4] Key Laboratory of New Energy Materials and Technologies,undefined
[5] University of Science and Technology Beijing,undefined
来源
Scientific Reports | / 5卷
关键词
D O I
暂无
中图分类号
学科分类号
摘要
We report a self-powered, lightweight and cost-effective active sensor system for vibration monitoring with multiplexed operation based on contact electrification between sensor and detected objects. The as-fabricated sensor matrix is capable of monitoring and mapping the vibration state of large amounts of units. The monitoring contents include: on-off state, vibration frequency and vibration amplitude of each unit. The active sensor system delivers a detection range of 0–60 Hz, high accuracy (relative error below 0.42%), long-term stability (10000 cycles). On the time dimension, the sensor can provide the vibration process memory by recording the outputs of the sensor system in an extend period of time. Besides, the developed sensor system can realize detection under contact mode and non-contact mode. Its high performance is not sensitive to the shape or the conductivity of the detected object. With these features, the active sensor system has great potential in automatic control, remote operation, surveillance and security systems.
引用
收藏
相关论文
共 56 条
  • [1] Singh GK(2003)Induction machine drive condition monitoring and diagnostic research - a survey Elect. Pow. Syst. Res. 64 145-158
  • [2] Al Kazzaz SAS(2006)Vibration monitoring for defect diagnosis of rolling element bearings as a predictive maintenance tool: Comprehensive case studies Ndt & E Int. 39 293-298
  • [3] Orhan S(2004)Application of the wavelet transform in machine condition monitoring and fault diagnostics: a review with bibliography Mech. Syst. Signal Pr. 18 199-221
  • [4] Akturk N(2006)A comparative experimental study on the use of acoustic emission and vibration analysis for bearing defect identification and estimation of defect size Mech. Syst. Signal Pr. 20 1537-1571
  • [5] Celik V(2003)Detection of gear failures via vibration and acoustic signals using wavelet transform Mech. Syst. Signal Pr. 17 787-804
  • [6] Peng ZK(2014)The use of acoustic emission for the condition assessment of gas turbines: Acoustic emission generation from normal running P. I. Mech. Eng. E-J Pro. 228 286-308
  • [7] Chu FL(2004)Prospects for Fibre Bragg Gratings and fabry-perot interferometers in fibre-optic vibration sensing Sensor. Actuat. a-Phys. 113 20-38
  • [8] Al-Ghamd AM(2014)Fault diagnosis of rotating machine by thermography method on support vector machine J Mech. Sci. Technol. 28 2947-2952
  • [9] Mba D(2015)Active Micro-Actuators for Optical Modulation Based on a Planar Sliding Triboelectric Nanogenerator Adv. Mater. 27 719-726
  • [10] Baydar N(2015)Low temperature dependence of triboelectric effect for energy harvesting and self-powered active sensing Appl. Phys. Lett. 106 013114-216