Bio-inspired search algorithms to solve robotic assembly line balancing problems

被引:0
作者
J. Mukund Nilakantan
S. G. Ponnambalam
N. Jawahar
G. Kanagaraj
机构
[1] Monash University Malaysia,Advanced Engineering Platform and School of Engineering
[2] Thiagarajar College of Engineering,Department of Mechanical Engineering
来源
Neural Computing and Applications | 2015年 / 26卷
关键词
Robotic assembly line balancing; Particle swarm optimization; Cuckoo search; Local search;
D O I
暂无
中图分类号
学科分类号
摘要
Robots are employed in assembly lines to increase the productivity. The objective of robotic assembly line balancing (rALB) problem is to balance the assembly line, by allocating equal amount of tasks to the workstations on the line while assigning the most efficient robot to perform the assembly task at the workstation. In this paper, bio-inspired search algorithms, viz. particle swarm optimization (PSO) algorithm and a hybrid cuckoo search and particle swarm optimization (CS-PSO), are proposed to balance the robotic assembly line with the objective of minimizing the cycle time. The performance of the proposed PSO and hybrid CS-PSO is evaluated using the 32 benchmark problems available in the literature. The simulation results show that both PSO and hybrid CS-PSO are capable of providing solutions within the upper bound obtained by hybrid GA, the only metaheuristic reported so far for rALB in the literature and comparable to the solutions obtained by IBM CPLEX Optimization solver. It is also observed that hybrid CS-PSO is performing better than PSO in terms of cycle time.
引用
收藏
页码:1379 / 1393
页数:14
相关论文
共 82 条
[1]  
Salveson ME(1955)The assembly line balancing problem J Ind Eng 6 18-25
[2]  
Kilincci O(2006)A Petri net approach for simple assembly line balancing problems Int J Adv Manuf Technol 30 1165-1173
[3]  
Bayhan GM(1986)A survey of exact algorithms for the simple assembly line balancing problem Manage Sci 32 909-932
[4]  
Baybars I(2012)A review on assembly sequence planning and assembly line balancing optimisation using soft computing approaches Int J Adv Manuf Technol 59 335-349
[5]  
Rashid MFF(2006)A genetic algorithm for robotic assembly line balancing Eur J Oper Res 168 811-825
[6]  
Hutabarat W(2009)An efficient approach for type II robotic assembly line balancing problems Comput Ind Eng 56 1065-1080
[7]  
Tiwari A(1983)An integer programming procedure for assembly system design problems Oper Res 31 522-545
[8]  
Levitin G(1988)Equipment selection and task assignment for multiproduct assembly system design Int J Flex Manuf Syst 1 31-50
[9]  
Rubinovitz J(1964)An algorithm for the line balancing problem Manage Sci 11 308-315
[10]  
Shnits B(1981)Branch and bound and heuristic procedures for assembly line balancing with paralleling of stations Int J Prod Res 19 565-576