Achieving high strength and high ductility in magnesium alloys using severe plastic deformation combined with low-temperature aging

被引：174

作者：

Kim, W. J. ^{[1
]}

Jeong, H. G. ^{[2
]}

Jeong, H. T. ^{[3
]}

机构：

[1] Hongik Univ, Dept Mat Sci & Engn, Seoul 121791, South Korea

[2] KITECH, Mfg Proc Res Ctr, Digital Prod Proc Team, Inchon 463130, South Korea

[3] Kangnung Natl Univ, Dept Met & Mat Engn, Kangnung 210702, Gangwon Do, South Korea

来源：

SCRIPTA MATERIALIA | 2009年 / 61卷 / 11期

关键词：

Severe plastic deformation (SPD); Magnesium alloys; Ductility; Ultrafine-grained microstructure; Aging; AZ91 MG ALLOY; MECHANICAL-PROPERTIES; GRAIN-SIZE; MICROSTRUCTURE; BEHAVIOR; SHEETS; AL; EXTRUSION; TEXTURE;

D O I：

10.1016/j.scriptamat.2009.08.020

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

A novel method of fabricating age-hardenable magnesium alloys with high strength and high ductility was developed using high-ratio differential speed rolling combined with low-temperature aging. The ultrafine-grained Mg-9Al-1Zn alloy processed by this technique exhibited a high yield stress of >400 MPa and tensile elongations of 12-14%. The high strength could be attributed to grain size and particle strengthening effects, while the high ductility could be attributed to weakening of the basal texture component. (C) 2009 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

引用

页码：1040 / 1043

页数：4

共 50 条

[31] Combination of High Yield Strength and Improved Ductility of 21Cr Lean Duplex Stainless Steel by Tailoring Cold Deformation and Low-Temperature Short-Term Aging
Zhenghong Liu
Zhigang Wu
Ying Han
Xiaolei Song
Guoqing Zu
Weiwei Zhu
Xu Ran
Acta Metallurgica Sinica (English Letters), 2024, 37 : 695 - 702
[32] Achieving ultrahigh strength and ductility via high-density nanoprecipitates triggering multiple deformation mechanisms in a dual-aging high-entropy alloy with precold deformation
Liu, Liyuan
Zhang, Yang
Zhang, Zhongwu
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2025, 205 : 27 - 41
[33] On the work hardening capacity of high entropy alloys during low-temperature deformation: A review
Hamdi, Hedayat
Charkhchian, Javad
Abedi, Hamid Reza
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2024, 915
[34] Manufacturing of high strength thin-walled aluminum 6063 tubes through severe plastic deformation combined with peak-aging treatment
Emamidoustabad, R.
Farshidi, M. H.
Miyamoto, H.
Ito, H.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2023, 237 (09) : 1436 - 1445
[35] Mechanism of high-strength and ductility of Mg-RE alloy fabricated by low-temperature extrusion and aging treatment
Jin, Xueze
Xu, Wenchen
Shan, Debin
Guo, Bin
Jin, Bo Cheng
MATERIALS & DESIGN, 2021, 199
[36] Strength enhancement of high entropy alloy HfNbTaTiZr by severe plastic deformation
Cizek, J.
Hausild, P.
Cieslar, M.
Melikhova, O.
Vlasak, T.
Janecek, M.
Kral, R.
Harcuba, P.
Lukac, F.
Zyka, J.
Malek, J.
Moon, J.
Kim, H. S.
JOURNAL OF ALLOYS AND COMPOUNDS, 2018, 768 : 924 - 937
[37] Circumventing strength-ductility paradox in high entropy alloys through deformation processing
Garg, Mayank
Grewal, Harpreet S.
Sharma, Ram K.
Gwalani, Bharat
Arora, Harpreet S.
JOURNAL OF ALLOYS AND COMPOUNDS, 2023, 933
[38] Revealing the deformation mechanisms of Cu-Al alloys with high strength and good ductility
Tian, Y. Z.
Zhao, L. J.
Park, N.
Liu, R.
Zhang, P.
Zhang, Z. J.
Shibata, A.
Zhang, Z. F.
Tsuji, N.
ACTA MATERIALIA, 2016, 110 : 61 - 72
[39] Achieve high strength and ductility in AZ61 magnesium alloy by caliber rolling combined with inter-pass annealing
Sun, Yinuo
An, Chen
Ge, Zhibao
Yan, Tingliang
Pei, Di
Li, Xinlin
Wang, Xiang
JOURNAL OF ALLOYS AND COMPOUNDS, 2025, 1019
[40] Achieving high ductility and low in-plane anisotropy in magnesium alloy through a novel texture design strategy
Liu, Shi
Wang, Cheng
Ning, Hong
Meng, Zhao-Yuan
Guan, Kai
Wang, Hui-Yuan
JOURNAL OF MAGNESIUM AND ALLOYS, 2024, 12 (07) : 2863 - 2873

← 1 2 3 4 5 →