Modification of the surfaces of stainless steel during titanium nitride deposition by a dynamic mixing method

被引：2

作者：

Yokota, K ^{[1
]}

Tamura, S

Nakamura, K

Horiguchi, M

Nakaiwa, H

Sugimoto, T

Akamatsu, K

Nakao, K

机构：

[1] Kansai Univ, Fac Engn, Dept Elect, Suita, Osaka 5648680, Japan

[2] High Technol Res Ctr, Suita, Osaka 5648680, Japan

来源：

NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS | 2000年 / 166卷

关键词：

titanium nitride; thin film; dynamic mixing; stainless steel;

D O I：

10.1016/S0168-583X(99)01168-4

中图分类号：

TH7 [仪器、仪表];

学科分类号：

0804 ; 080401 ; 081102 ;

摘要：

Surfaces of stainless steel SUS304 were coated with titanium nitride (TIN) at temperatures ranging from 400 degrees C to 770 degrees C using a dynamic mixing technique. The N+ ions were accelerated at energies of 0.5-2.0 keV, and were implanted into the stainless steel. The composition of the prepared TiN films was measured using Rutherford backscattering spectrometry with lie ions at an energy of 2.0 MeV. Intermediate layers containing compounds such as FesNq, Cr2N, and CrFe were formed between the TiN films and substrates at substrate temperatures higher than 700 degrees C. The thickness of the TIN films decreased significantly when the intermediate layers were formed. (C) 2000 Elsevier Science B.V. All rights reserved.

引用

页码：87 / 91

页数：5

共 50 条

[31] Deposition of Nano Sized Titanium Nitride on H11 Tool Steel using Active Screen Plasma Nitriding Method
Yazdani, A.
Soltanieh, M.
Aghajani, H.
Rastegari, S.
JOURNAL OF NANO RESEARCH, 2010, 11 : 79 - 84
[32] IMPORTANCE OF FINISHING FOR THE INTEGRITY OF STAINLESS STEEL SURFACES DURING SANITATION TREATMENTS
Stoica, M.
Alexe, P.
Carac, G.
Nicolau, A.
JOURNAL OF ENVIRONMENTAL PROTECTION AND ECOLOGY, 2011, 12 (04): : 1669 - 1679
[33] Mitigation of cracks in laser welding of titanium and stainless steel by in-situ nickel interlayer deposition
Chattopadhyay, Angshuman
Muvvala, Gopinath
Sarkar, Sagar
Racherla, Vikranth
Nath, Ashish Kumar
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2022, 300
[34] A study on stainless steel mirror surface polishing by using the electrophoretic deposition method
Tsui, Hai-Ping
Yan, Biing-Hwa
Wu, Wei Te
Hsu, Sheng-Tsai
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2007, 47 (12-13) : 1965 - 1970
[35] Effects of dynamic ion mixing coating condition for fatigue properties of stainless steel with TiN film
Fukui, Satoshi
Murakami, Ri-ichi
Yonekura, Daisuke
PROGRESSES IN FRACTURE AND STRENGTH OF MATERIALS AND STRUCTURES, 1-4, 2007, 353-358 : 1875 - +
[36] *Investigation on the formation of titanium nitride thin films on 304 type stainless steel using plasma focus device
Fanil, Narges
Savaloni, Hadi
JOURNAL OF THEORETICAL AND APPLIED PHYSICS, 2012, 6 (01)
[37] Depth profiling of titanium nitride thin films deposited on stainless steel It utilizing combined EBS and NRA techniques
Rihawy, M. S.
Abdallah, B.
Ahmad, M.
NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS, 2018, 430 : 64 - 71
[38] Bias voltage influence on surface morphology of titanium nitride synthesized by dynamic nitrogen and titanium plasma immersion ion implantation and deposition
Tian, XB
Wang, LP
Fu, RKY
Chu, PK
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2002, 337 (1-2): : 236 - 240
[39] Food-Safe Modification of Stainless Steel Food-Processing Surfaces to Reduce Bacterial Biofilms
Awad, Tarek S.
Asker, Dalal
Hatton, Benjamin D.
ACS APPLIED MATERIALS & INTERFACES, 2018, 10 (27) : 22902 - 22912
[40] Comparing chemical and plasma modification of stainless steel surfaces - Relevance for adsorption of adhesion promotor vinyltrimethoxysilane (VTMS)
Quinones, Dustin
Braun, Kai
Meixner, Alfred
Chasse, Thomas
APPLIED SURFACE SCIENCE, 2022, 575

← 1 2 3 4 5 →