Modification of the surfaces of stainless steel during titanium nitride deposition by a dynamic mixing method

被引：2
|
作者：
Yokota, K [1 ]
Tamura, S
Nakamura, K
Horiguchi, M
Nakaiwa, H
Sugimoto, T
Akamatsu, K
Nakao, K
机构：
[1] Kansai Univ, Fac Engn, Dept Elect, Suita, Osaka 5648680, Japan
[2] High Technol Res Ctr, Suita, Osaka 5648680, Japan
来源：
NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS | 2000年 / 166卷
关键词：
titanium nitride; thin film; dynamic mixing; stainless steel;
D O I：
10.1016/S0168-583X(99)01168-4
中图分类号：
TH7 [仪器、仪表];
学科分类号：
0804 ; 080401 ; 081102 ;
摘要：
Surfaces of stainless steel SUS304 were coated with titanium nitride (TIN) at temperatures ranging from 400 degrees C to 770 degrees C using a dynamic mixing technique. The N+ ions were accelerated at energies of 0.5-2.0 keV, and were implanted into the stainless steel. The composition of the prepared TiN films was measured using Rutherford backscattering spectrometry with lie ions at an energy of 2.0 MeV. Intermediate layers containing compounds such as FesNq, Cr2N, and CrFe were formed between the TiN films and substrates at substrate temperatures higher than 700 degrees C. The thickness of the TIN films decreased significantly when the intermediate layers were formed. (C) 2000 Elsevier Science B.V. All rights reserved.
引用
收藏
页码：87 / 91
页数：5
相关论文
共 50 条
  • [21] Deposition of titanium nitride thin films on stainless steel - AISI 304 substrates using a plasma focus device
    Rawat, RS
    Chew, WM
    Lee, P
    White, T
    Lee, S
    SURFACE & COATINGS TECHNOLOGY, 2003, 173 (2-3): : 276 - 284
  • [22] Corrosion-resistant titanium nitride coatings formed on stainless steel by ion-beam-assisted deposition
    Baba, K.
    Hatada, R.
    Surface and Coatings Technology, 1994, 66 (1 -3 pt 2) : 368 - 372
  • [23] Adsorption of Titanium Halides on Nitride and Oxide Surfaces during Atomic Layer Deposition: A DFT Study
    Park, Jeongwoo
    Yu, Neung Kyung
    Jang, Donghak
    Jung, Eunae
    Noh, Hyunsik
    Moon, Jiwon
    Kil, Deoksin
    Shong, Bonggeun
    COATINGS, 2020, 10 (08)
  • [24] Synthesis and Characterization of Titanium and Titanium Nitride Deposition on High Speed Steel Substrate
    Kumar, M. R.
    Behera, C. K.
    Mohan, S.
    Aich, S.
    MATERIALS TODAY-PROCEEDINGS, 2019, 18 : 5416 - 5420
  • [25] Surface modification of austenitic stainless steel by titanium ion implantation
    Evans, P.J.
    Hyvarinen, J.
    Samandi, M.
    Surface and Coatings Technology, 1995, 71 (02): : 151 - 158
  • [26] TITANIUM NITRIDE SPUTTER-DEPOSITION ON TO DIES USING TWIN ION-BEAMS FOR DYNAMIC MATERIAL MIXING
    WANG, XG
    CHEN, BQ
    VACUUM, 1994, 45 (01) : 23 - 28
  • [27] Dynamic recrystallisation during isothermal hot deformation in a titanium modified austenitic stainless steel
    Mandal, Sumantra
    Bhaduri, A. K.
    Raj, Baldev
    Sarma, V. Subramanya
    RECRYSTALLIZATION AND GRAIN GROWTH IV, 2012, 715-716 : 140 - +
  • [28] Deposition of titanium silicide on stainless steel AISI 304 surface
    Burkov, Alexander
    Krutikova, Valeria
    OBRABOTKA METALLOV-METAL WORKING AND MATERIAL SCIENCE, 2022, 24 (04): : 127 - 137
  • [29] Effect of titanium nitride (TiN) on the corrosion behavior of a supermartensitic stainless steel
    Rodrigues, Cesar Augusto D.
    Bandeira, Rafael M.
    Duarte, Barbara B.
    Tremiliosi-Filho, Germano
    Roche, Virginie
    Jorge, Alberto M., Jr.
    MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 2019, 70 (01): : 28 - 36
  • [30] CORROSION-RESISTANT TITANIUM NITRIDE COATINGS FORMED ON STAINLESS-STEEL BY ION-BEAM-ASSISTED DEPOSITION
    BABA, K
    HATADA, R
    SURFACE & COATINGS TECHNOLOGY, 1994, 66 (1-3): : 368 - 372
12345