Heating and heat-dependent mechanical characteristics of CNT-embedded cementitious composites

被引：135

作者：

Kim, G. M. ^{[1
]}

Naeem, Faizan ^{[1
]}

Kim, H. K. ^{[2
]}

Lee, H. K. ^{[1
]}

机构：

[1] Korea Adv Inst Sci & Technol, Dept Civil & Environm Engn, Taejon 305701, South Korea

[2] Chosun Univ, Sch Architecture, 309 Pilmun Daero, Kwangju 501759, South Korea

来源：

COMPOSITE STRUCTURES | 2016年 / 136卷

关键词：

Carbon nanotube (CNT); Cement composites; Self-heating; Electrical resistivity; Mechanical properties; CARBON NANOTUBE; TEMPERATURE-COEFFICIENT; CONDUCTIVE CONCRETE; THERMAL-PROPERTIES; RESISTANCE; RESISTIVITY; EFFICIENCY;

D O I：

10.1016/j.compstruct.2015.10.010

中图分类号：

O3 [力学];

学科分类号：

08 ; 0801 ;

摘要：

Cementitious composites incorporated with CNT were developed in the present study as a self-heating element, and heating and heat-dependent mechanical characteristics of the composites were investigated. Silica fume and poly-carboxylic acid based superplasticizer were used as dispersion agents for the CNT particles to ensure a certain electrical resistivity value that is required to induce heat generation capability in the composites. The amount of CNT added to the composites and the input voltages were varied from 0.1 wt% to 2.0 wt% and from 3 V to 20 V, respectively. A cyclic self-heating test was conducted to investigate the stability in the heat generation capability and electrical resistivity of the composites. Moreover, compressive strength and TG/DTA tests were conducted to investigate the heat-dependent mechanical properties and the amount of hydration products of the cyclically heated composites. The test results showed that the heat generation capability of the CNT-embedded cementitious composites was improved with an increase in the amount of CNT and the composites having CNT less than 0.6 wt% is appropriate as a heating element. (C) 2015 Elsevier Ltd. All rights reserved.

引用

页码：162 / 170

页数：9

共 40 条

[11] Using carbon nanotubes to improve strengthening efficiency of carbon fiber/epoxy composites confined RC columns [J].

Irshidat, Mohammad R. ;

Al-Saleh, Mohammed H. ;

Al-Shoubaki, Mahmoud .

COMPOSITE STRUCTURES, 2015, 134 :523-532

[12] COMPRESSIVE STRENGTH OF CONCRETE AT HIGH-TEMPERATURES - A REASSESSMENT [J].

KHOURY, GA .

MAGAZINE OF CONCRETE RESEARCH, 1992, 44 (161) :291-309

[13] Improved piezoresistive sensitivity and stability of CNT/cement mortar composites with low water-binder ratio [J].

Kim, H. K. ;

Park, I. S. ;

Lee, H. K. .

COMPOSITE STRUCTURES, 2014, 116 :713-719

[14] Enhanced effect of carbon nanotube on mechanical and electrical properties of cement composites by incorporation of silica fume [J].

Kim, H. K. ;

Nam, I. W. ;

Lee, H. K. .

COMPOSITE STRUCTURES, 2014, 107 :60-69

[15] Use of CaO as an activator for producing a price-competitive non-cement structural binder using ground granulated blast furnace slag [J].

Kim, Min Sik ;

Jun, Yubin ;

Lee, Changha ;

Oh, Jae Eun .

CEMENT AND CONCRETE RESEARCH, 2013, 54 :208-214

[16]

Lerner L., 1997, PHYS SCI ENG, P732

[17]

Li H, 2011, P SOC PHOTO-OPT INS, V7978

[18] Effect of compressive strain on electrical resistivity of carbon black-filled cement-based composites [J].

Li, Hui ;

Xiao, Hui-gang ;

Ou, Jin-ping .

CEMENT & CONCRETE COMPOSITES, 2006, 28 (09) :824-828

[19] Self-deicing road system with a CNFP high-efficiency thermal source and MWCNT/cement-based high-thermal conductive composites [J].

Li, Hui ;

Zhang, Qiangqiang ;

Xiao, Huigang .

COLD REGIONS SCIENCE AND TECHNOLOGY, 2013, 86 :22-35

[20] The influence of crystalline and aggregate structure on PTC characteristic of conductive polyethylene carbon black composite [J].

Luo, YL ;

Wang, GC ;

Zhang, BY ;

Zhang, ZP .

EUROPEAN POLYMER JOURNAL, 1998, 34 (08) :1221-1227

← 1 2 3 4 →