Interface roughness effect on friction map under fretting contact conditions

被引：60

作者：

Kubiak, K. J. ^{[1
]}

Mathia, T. G. ^{[1
]}

Fouvry, S. ^{[1
]}

机构：

[1] Ecole Cent Lyon, Lab Tribol & Dynam Syst, CNRS UMR 5513, F-69134 Ecully, France

来源：

TRIBOLOGY INTERNATIONAL | 2010年 / 43卷 / 08期

关键词：

Fretting map; Surface roughness; Sliding regime; Texturation; SURFACE-ROUGHNESS; WEAR;

D O I：

10.1016/j.triboint.2010.02.010

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

In many industrial applications where fretting damage is observed in the contact (e.g. rotor/blade, electrical contacts, assembly joint, axe/wheel, clutch) the external loadings or geometry design cannot be changed. Therefore, the surface preparation and finishing process become essential to control and reduce the damage caused by fretting. In this paper, the authors present the experimental study of the initial surface roughness and machining process influence on fretting conditions in both partial and full sliding regimes. Surfaces prepared by milling and smooth abrasive polishing processes have been analysed. The influence of roughness on sliding behaviour and analysis of friction have been reported. Also, the contact pressure influence and qualitative analysis of fretting wear scar have been presented. (C) 2010 Elsevier Ltd. All rights reserved.

引用

页码：1500 / 1507

页数：8

共 17 条

[1]

Barrell DJW, 2004, TRIBOLOGY S, V43, P807

[2] Effect of surface roughness of self-mated alumina on friction and wear in isooctane-lubricated reciprocating sliding contact [J].

Dulias, U ;

Fang, L ;

Zum Gahr, KH .

WEAR, 2002, 252 (3-4) :351-358

[3] Quantification of fretting damage [J].

Fouvry, S ;

Kapsa, P ;

Vincent, L .

WEAR, 1996, 200 (1-2) :186-205

[4] Study and evaluation of fretting critical slip conditions by applying the design of experiments method [J].

Han, A. ;

Pillon, G. ;

Nichici, A. ;

Vannes, B. ;

Grevey, D. .

WEAR, 2006, 261 (10) :1080-1086

[5] Behaviour of shot peening combined with WC-CoHVOF coating under complex fretting wear and fretting fatigue loading conditions [J].

Kubiak, K. ;

Fouvry, S. ;

Marechal, A. M. ;

Vernet, J. M. .

SURFACE & COATINGS TECHNOLOGY, 2006, 201 (07) :4323-4328

[6] Comparison of shot peening and nitriding surface treatments under complex fretting loadings [J].

Kubiak, K. ;

Fouvry, S. ;

Wendler, B. G. .

ADVANCED MATERIALS AND TECHNOLOGIES, 2006, 513 :105-118

[7]

Kubiak K., THESIS ECOLE CENTRAL

[8] RELATIONSHIPS BETWEEN SURFACE-STATES, FINISHING PROCESSES AND ENGINEERING PROPERTIES [J].

MATHIA, T ;

LOUIS, F ;

MAEDER, G ;

MAIREY, D .

WEAR, 1982, 83 (02) :241-250

[9] FUNCTIONAL-SIGNIFICANCE OF DIFFERENT TECHNIQUES FOR SURFACE-MORPHOLOGY MEASUREMENTS [J].

MATHIA, T ;

ZAHOUANI, H ;

ROUSSEAU, J ;

LEBOSSE, JC .

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 1995, 35 (02) :195-202

[10] A fretting crack initiation prediction taking into account the surface roughness and the crack nucleation process volume [J].

Proudhon, H ;

Fouvry, S ;

Buffière, JY .

INTERNATIONAL JOURNAL OF FATIGUE, 2005, 27 (05) :569-579

← 1 2 →