Tribological Properties of Surface Friction Hardened AISI 316L Steel

被引：2

作者：

Khaksaran, A. ^{[1
]}

Taghiabadi, R. ^{[1
]}

Jafarzadegan, M. ^{[1
]}

机构：

[1] Imam Khomeini Int Univ, Dept Mat Sci, Qazvin, Iran

来源：

TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS | 2021年 / 74卷 / 08期

关键词：

AISI; 316L; Friction hardening; Hardness; Tribology; Friction; wear;

D O I：

10.1007/s12666-021-02306-6

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

Friction hardening was employed to improve the tribological properties of AISI 316L austenitic stainless steel (ASS 316L). The process was conducted using a hard indenter (74 +/- 1 HRC) under the travel speeds of 90, 180, and 360 mm/s for 30 and 60 passes. The results showed that FH increased the surface hardness of annealed ASS 316L alloy by 180%. The sliding wear tests also showed the positive impact of FH on the wear resistance and friction behaviour. For instance, at the applied pressure of 1 MPa, the wear rate and coefficient of friction (COF) of FHed ASS 316L sample (90 mm/s, 30 passes) were reduced by 68 and 20%, respectively, as compared to those of the annealed sample.

引用

页码：1979 / 1989

页数：11

共 53 条

[1]

Araujo JDES, 2017, REM INT ENG J, V70

[2] CONTACT AND RUBBING OF FLAT SURFACES [J].