Highly stable semi-transparent CH3NH3PbI3 sandwich type perovskite solar sub-module with neutral color

similar to 10% semi-transparent neutral color sandwich type CH3NH3PbI3 (MAPbI(3)) perovskite sub-module (active area = 25 cm(2)) with UV cross-linked polystyrene passivation layer showed similar to 2.8% degradation of initial efficiency after continuous light soaking of 1 Sun for 1000 h at 55 degrees C. Due to the role of islandmorphology - MAPbI(3) as selective UV-cut mask, the UV curable monomeric compounds on the islandmorphology- MAPbI(3)/blocking TiO2/F-doped tin oxide substrate could be selectively cross-linked polymerized by exposure of UV light and consequently the UV cured passivation layer could be reproducibly deposited in the gaps between perovskite islands after simple washing of unreacted residue. The degree of cross-linking was controlled by adjusting the concentration of divinylbezene cross-linker in the UV curable monomeric compounds from 1 to 7 mol% and eventually 5 mol% sample showed the best power conversion efficiency of 11.58% for forward scan condition and 11.95% for reverse scan condition (active area = 1 cm(2), geometric fill factor = 100%, average = 10.28 +/- 0.96% for 40 samples: average visible transmittance = 20.1%). When the active area of the MAPbI(3) perovskite sub-module increases to 1 -> 25 -> 100 cm(2), the power conversion efficiency was slightly decreased to 11.95 -> 10.16 -> 7.08% at 1 Sun condition. (C) 2017 Elsevier Ltd. All rights reserved.