Evaluation of viscosity of molten SiO2-CaO-MgO-Al2O3 slags in blast furnace operation

被引：54

作者：

Nakamoto, M

Tanaka, T

Lee, JH

Usui, T

机构：

[1] Osaka Univ, Suita, Osaka 5650871, Japan

[2] Osaka Univ, Grad Sch Engn, Suita, Osaka 5650871, Japan

来源：

ISIJ INTERNATIONAL | 2004年 / 44卷 / 12期

关键词：

blast furnace; low temperature; molten slag; viscosity; Al2O3;

D O I：

10.2355/isijinternational.44.2115

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

The viscosity of molten SiO2-CaO-MgO-Al2O3 Slag was measured using a rotating cylinder method at high CaO and Al2O3 concentration regions to search for a slag with low melting temperature and low viscosity. The experimental results showed that the viscosity of molten 35mass% Al2O3-43.1 mass% CaO-7.5mass% MgO-14.4mass% SiO2 slag at 1673K was lower than 0.6 Pa.s that satisfies the fluidity in blast furnace operation. The experimental results were compared with the calculated results of the viscosity model derived by the authors. The viscosity of molten SiO2-CaO-MgO-Al2O3 system can be evaluated from our model in wide Al2O3 concentration range.

引用

页码：2115 / 2119

页数：5

共 12 条

[1]

Gaye H., 1984, 2nd Int. Symp. Metal Slags and Fluxes, P357

[2]

HASEGAWA M, 2003, CAMP ISIJ, V16, P1053

[3]

Iida T, 2000, HIGH TEMP MATER PROC, V19, P153

[4] Basic research on ironmaking process in blast furnace and development in near future [J].