High-speed roll caster for strip casting of aluminum alloy

被引：2
|
作者：
Haga, T
Suzuki, S
机构：
[1] Osaka Inst Technol, Asahi Ku, Osaka 5358585, Japan
[2] Tech Univ Berlin, Inst Met Mat, DE-10623 Berlin, Germany
来源：
ALUMINIUM ALLOYS: THEIR PHYSICAL AND MECHANICAL PROPERTIES, PTS 1-3 | 2000年 / 331-3卷
关键词：
continuous casting; roll casting; strip casting; twin roll caster;
D O I：
10.4028/www.scientific.net/MSF.331-337.185
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A melt ejection twin roll easter was devised for high-speed roll casting of aluminum alloy that has sound surfaces. This easter can cast A5182 alloy strip at the speed of up to 120 m/min. The strip surface can be improved by ejecting the melt on to the roll. The strip does not stick to the roll because of separating force is very small. Therefore, lubricant is not required in order to prevent the sticking of the strip at the roll. The microstructure of the strip cast using the melt ejection twin roll. easter is very fine.
引用
收藏
页码：185 / 190
页数：6
相关论文
共 50 条
  • [31] Twin roll casting of aluminum alloy strips
    Haga, T
    Tkahashi, K
    Ikawaand, M
    Watari, H
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2004, 153 : 42 - 47
  • [32] Strip Casting by a Single Roll Caster Equipped with a Scraper
    Haga, Toshio
    Akitsu, Kazuya
    Yamabayashir, Takanori
    Kumai, Shinji
    Watari, Hisaki
    ADVANCES IN MATERIALS PROCESSING IX, 2010, 443 : 122 - +
  • [33] 6111 Aluminium alloy strip casting using an unequal diameter twin roll caster
    Haga, T
    Ikawa, M
    Wtari, H
    Kumai, S
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2006, 172 (02) : 271 - 276
  • [34] Casting of Clad Strip by a Twin Roll Caster
    Haga, Toshio
    Aluminium Alloys 2014 - ICAA14, 2014, 794-796 : 772 - 777
  • [35] Roll casting of wire inserted aluminum alloy strip
    Haga, T.
    Takahashi, K.
    Inui, H.
    Sakaguchi, H.
    Watari, H.
    Kumai, S.
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2007, 187 : 508 - 511
  • [36] Investigation of the influence of the roll surface on the cast strip at the casting using a vertical type high speed twin roll caster
    Yamashiki, T.
    Haga, T.
    Kumai, S.
    Watari, H.
    FRONTIERS OF MECHANICAL ENGINEERING AND MATERIALS ENGINEERING, PTS 1 AND 2, 2012, 184-185 : 271 - +
  • [37] Casting of clad strip by an unequal diameter twin roll caster
    Haga, T.
    Sawai, M.
    Nakamura, R.
    Watari, H.
    Kumai, S.
    THERMEC 2009, PTS 1-4, 2010, 638-642 : 413 - +
  • [38] Semisolid strip casting using a twin roll caster equipped with a cooling slope
    Haga, T
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2002, 130 : 558 - 561
  • [39] Formation of Internal Crack in High-Speed Twin-Roll Cast 6022 Aluminum Alloy Strip
    Kim, Min-Seok
    Arai, Yoshiyuki
    Hori, Yasuharu
    Kumai, Shinji
    MATERIALS TRANSACTIONS, 2010, 51 (10) : 1854 - 1860
  • [40] Casting of composite strip using a twin roll caster
    Haga, T
    Takahashi, K
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2004, 157 : 701 - 705
12345