A simple model describing the non-linear biaxial tensile behaviour of PVC-coated polyester fabrics for use in finite element analysis

A simple model based on experimental observations of the yarn-parallel biaxial extension of PVC-coated polyester fabric cruciform specimens is proposed. In situ loading conditions are considered. The material behaviour is assumed to be plane stress orthotropic for a particular load ratio, while the elastic properties can vary with the load ratio in order to represent the complex interaction between warp and fill yarns. A linear relationship is experimentally found between elastic moduli and normalized load ratios for a wide range of PVC-coated polyester (Type I to Type IV). Two new parameters corresponding to the moduli variations are introduced to complement the existing plane stress orthotropic model. Theoretical results show that only five biaxial tests are required to accurately describe the material response with the proposed material model. Finally, the model was integrated in a commercial finite element software. It is shown that the proposed material model significantly increases the accuracy of the finite element predictions compared to the standard allotropic linear material model with almost identical computation times. (C) 2009 Elsevier Ltd. All rights reserved.