The experimental study of thermoelectric cooler performance in Medan city

被引：0

作者：

Lubis, Z. ^{[1
]}

Sitorus, T. B. ^{[1
]}

Ariani, F. ^{[1
]}

Christopel, B. ^{[1
]}

机构：

[1] Univ Sumatera Utara, Mech Engn, Medan, Indonesia

来源：

2ND INTERNATIONAL CONFERENCE ON INDUSTRIAL AND MANUFACTURING ENGINEERING (ICI&ME 2020) | 2020年 / 1003卷

关键词：

D O I：

10.1088/1757-899X/1003/1/012064

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The research purpose is to determine the performance of thermoelectric cooler boxes driven by solar power through photovoltaic devices. The research method was conducted experimentally. The designed thermoelectric cooler has dimensions of 1032 x 676 x 25 mm. The cooler box testing is carried out for several days, starting at 09.30-16.00 WIB with varying weather conditions in June 2020 in the Medan city. The installation of solar panel modules is carried out in locations not obstructed by buildings or other objects. The cooling load in the form of fruit and beverage cans is put in the box cooler. The test results showed that the minimum temperature of fruits and the minimum canned drinks obtained in the test were 25.63 degrees C and 26.58 degrees C, with an environmental temperature of 33,21 degrees C. The values of the coefficient of performance obtained during testing ranged from 0.051 to 0.101.

引用

页数：6

共 10 条

[1]

Cengel YA, 2003, Heat Transfer: A Practical Approach, Vsecond

[2] Plant calendar pattern based on rainfall forecast and the probability of its success in Deli Serdang regency of Indonesia [J].

Darnius, O. ;

Sitorus, S. .

INTERNATIONAL CONFERENCE ON MATHEMATICS, SCIENCE AND EDUCATION 2017 (ICMSE2017), 2018, 983

[3]

Frank Kreith, 2004, PRINCIPLES HEAT TRAN

[4] Effect of preheat and post heat on mechanical properties of 6061 aluminium tungsten inert gas welded joints [J].

Hamsi, A. ;

Sitorus, T. B. ;

Sinaga, R. K. .

2ND TALENTA CONFERENCE ON ENGINEERING, SCIENCE AND TECHNOLOGY, 2020, 801

[5]

Incropera F., 2011, Foundations of Heat Transfer, Vsixth

[6] Design of a heat exchanger of three concentric tube layer on contrary flow [J].

Lubis, Z. ;

Manik, T. U. H. S. G. ;

Rinkanto, M. ;

Sitorus, T. B. .

1ST INTERNATIONAL CONFERENCE ON INDUSTRIAL AND MANUFACTURING ENGINEERING, 2019, 505

[7] The experimental and simulation study of an earth-air heat exchanger in Medan city [J].

Manik, T. U. H. S. G. ;

Sitorus, T. B. ;

Panjaitan, M. L. ;

Saragih, Y. O. .

1ST INTERNATIONAL CONFERENCE ON INDUSTRIAL AND MANUFACTURING ENGINEERING, 2019, 505

[8] The open cycle simulation of the earth air heat exchanger using computational fluid dynamic [J].

Manik, T. U. H. S. G. ;

Simanjuntak, J. S. C. ;

Sitorus, T. B. .

1ST INTERNATIONAL CONFERENCE ON INDUSTRIAL AND MANUFACTURING ENGINEERING, 2019, 505

[9]

Samar, 2020, IOP C SER MAT SCI EN, V725

[10]

Sitorus T B, 2018, INT J ENG TECHNOLOGY, V6, P317

← 1 →