Effect of cold rolling and annealing temperature on structure, hardness and electrical conductivity of rapidly solidified alloy of Al-Cu-Mn-Zr system

被引:14
作者
Belov, N. A. [1 ]
Akopyan, T. K. [1 ]
Korotkova, N. O. [1 ]
Timofeev, V. N. [2 ]
Shurkin, P. K. [1 ]
机构
[1] Natl Univ Sci & Technol MISiS, 4 Leninsky Pr, Moscow 119049, Russia
[2] Siberian Fed Univ, 79 Svobodnyy Prospekt, Krasnoyarsk 660041, Russia
基金
俄罗斯科学基金会;
关键词
Al alloys; Eutectic; Nanocomposites; Phase diagrams; Microstructure;
D O I
10.1016/j.matlet.2021.130199
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The experimental heat resistant alloy Al-3.3Cu-2.5Mn-0.5Zr (wt. %) has been manufactured using the method of electromagnetic casting (EMC) providing solidification at an ultra-high rate (-104 degrees C/s). The microstructure, phase composition, mechanical and electrical properties of the alloy in as-cast state and after cold rolling followed by annealing has been extensively studied using both thermodynamic calculations and experimental analysis. The microstructure of the as-cast EMC rod consists of the fine Al2Cu phase inclusions and aluminum matrix where all Mn and Zr and most of Cu are dissolved. The annealing of cold rolled strip at 400 degrees C allows reaching the optimal combination of strength, electrical conductivity and thermal stability.
引用
收藏
页数:4
相关论文
共 9 条
[1]  
Avdulov A.A., 2017, TSVET MET
[2]   Effect of Zr additions and annealing temperature on electrical conductivity and hardness of hot rolled Al sheets [J].
Belov, N. A. ;
Alabin, A. N. ;
Matveeva, I. A. ;
Eskin, D. G. .
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2015, 25 (09) :2817-2826
[3]   Simultaneous Increase of Electrical Conductivity and Hardness of Al-1.5 wt.% Mn Alloy by Addition of 1.5 wt.% Cu and 0.5 wt.% Zr [J].
Belov, Nikolay ;
Korotkova, Natalya ;
Akopyan, Torgom ;
Tsydenov, Kirill .
METALS, 2019, 9 (12)
[4]  
Dobatkin V.I., 1995, RAPIDLY SOLIDIFIED A, P43
[5]  
EVANS JW, 1995, JOM-J MIN MET MAT S, V47, P38
[6]   Crystal substructures of the rotation-twinned T (Al20Cu2Mn3) phase in 2024 aluminum alloy [J].
Feng, Z. Q. ;
Yang, Y. Q. ;
Huang, B. ;
Li, M. H. ;
Chen, Y. X. ;
Ru, J. G. .
JOURNAL OF ALLOYS AND COMPOUNDS, 2014, 583 :445-451
[7]  
Polmear I.J., 2006, LIGHT METALS TRADITI, V4, P188
[8]   Inversed solid-phase grain boundary wetting in the Al-Zn system [J].
Protasova, S. G. ;
Kogtenkova, O. A. ;
Straumal, B. B. ;
Zieba, P. ;
Baretzky, B. .
JOURNAL OF MATERIALS SCIENCE, 2011, 46 (12) :4349-4353
[9]   Grain boundary complexions and pseudopartial wetting [J].
Straumal, B. B. ;
Mazilkin, A. A. ;
Baretzky, B. .
CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE, 2016, 20 (05) :247-256