Leaching, geochemical modelling and field verification of a municipal solid waste and a predominantly non-degradable waste landfill

被引:43
作者
van der Sloot, H. A. [1 ]
Kosson, D. S. [2 ]
van Zorneren, A. [3 ]
机构
[1] Hans van der Sloot Consultancy, Dorpsstr 216, NL-1721 BV Langedijk, Netherlands
[2] Vanderbilt Univ, Dept Civil & Environm Engn, Nashville, TN 37235 USA
[3] ECN, Environm & Energy Engn, POB 1, NL-1755 ZG Petten, Netherlands
关键词
Leaching; Municipal solid waste; Geochemical modelling; Field verification; Release prediction; HUMIC SUBSTANCES; ION-BINDING; BOTTOM ASH; PARAMETERS; FRAMEWORK; BATCH; PH;
D O I
10.1016/j.wasman.2016.07.032
中图分类号
X [环境科学、安全科学];
学科分类号
08 ; 0830 ;
摘要
In spite of the known heterogeneity, wastes destined for landfilling can be characterised for their leaching behaviour by the same protocols as soil, contaminated soil, sediments, sludge, compost, wood, waste and construction products. Characterisation leaching tests used in conjunction with chemical speciation modelling results in much more detailed insights into release controlling processes and factors than single step batch leaching tests like TCLP (USEPA) and EN12457 (EU Landfill Directive). Characterisation testing also can provide the potential for mechanistic impact assessments by making use of a chemical speciation fingerprint (CSF) derived from pH dependence leaching test results. This CSF then forms the basis for subsequent chemical equilibrium and reactive transport modelling to assess environmental impact in a landfill scenario under relevant exposure conditions, including conditions not readily evaluated through direct laboratory testing. This approach has been applied to municipal solid waste (MSW) and predominantly non-degradable waste (PNW) that is representative of a significant part of waste currently being landfilled. This work has shown that a multi-element modelling approach provides a useful description of the release from each of these matrices because relevant release controlling properties and parameters (mineral dissolution/precipitation, sorption on Fe and Al oxides, clay interaction, interaction with dissolved and particulate organic carbon and incorporation in solid solutions) are taken into consideration. Inclusion of dissolved and particulate organic matter in the model is important to properly describe release of the low concentration trace constituents observed in the leachate. The CSF allows the prediction of release under different redox and degradation conditions in the landfill by modifying the redox status and level of dissolved and particulate organic matter in the model runs. The CSF for MSW provides a useful starting point for comparing leachate data from other MSW landfills. (C) 2016 Elsevier Ltd. All rights reserved.
引用
收藏
页码:74 / 95
页数:22
相关论文
共 75 条
[1]  
[Anonymous], 1311 TCLP EPA
[2]  
[Anonymous], 212683 ISOTS
[3]  
[Anonymous], 2015, 14405 PREN CEN
[4]  
[Anonymous], 2015, 14429 EN
[5]  
[Anonymous], SCI REP
[6]  
[Anonymous], 2007, 212684 ISOTS
[7]  
[Anonymous], 2011, 12782 ISOTS
[8]  
[Anonymous], 1996, METHODS SOIL ANAL 3, DOI DOI 10.2136/SSSABOOKSER5.3.C35
[9]  
[Anonymous], 2002, EN124572
[10]  
Blakey N.C., 1996, 05096DIE4119 CWM