Production and characterization of Ti6Al4V/CaP nanocomposite powder for powder-based additive manufacturing systems

被引：6
作者：
Sayedain, Sayed Shahab [1 ]
Ekrami, Aliakbar [1 ]
Badrossamay, Mohsen [2 ]
机构：
[1] Sharif Univ Technol, Mat Sci & Engn Dept, POB 11155-9466, Tehran, Iran
[2] Isfahan Univ Technol, Mech Engn Dept, POB 84156-83111, Esfahan, Iran
来源：
POWDER TECHNOLOGY | 2021年 / 386卷
基金：
美国国家科学基金会;
关键词：
Additive manufacturing; Nanocomposite; Ti6Al4V; Calcium phosphate; Powder-based 3D printer; Flowability; METAL-MATRIX-COMPOSITES; CALCIUM-PHOSPHATE; CARBON NANOTUBES; PHASE-TRANSFORMATION; APATITE FORMATION; WEAR-RESISTANCE; FLOW PROPERTIES; LASER; ALLOY; TI;
D O I：
10.1016/j.powtec.2021.03.046
中图分类号：
TQ [化学工业];
学科分类号：
0817 ;
摘要：
Ti64/CaP nanocomposite powder was fabricated and characterized for use in powder-bed 3D printing. The microstructure and phase composition, morphology, particle size distribution, sphericity, flow behavior and dispersion of the as-fabricated particles on the building plate of the 3D printer were investigated. The results confirmed a uniform distribution of nanostructured calcium phosphate particles on the surface of primary Ti64 ones. Calcium phosphate appears as an octa-calcium phosphate phase. The morphology of the particles was shown as spherical, and their sphericity was better than the as-received Ti64 particles. The particle size distribution of nanocomposite powder indicated a smaller amount than the as-received Ti64 particles. Additionally, the flow behavior was improved compared to the as-received Ti64 and delivered an optimal dispersion on the building platform. Ultimately, Ti64/CaP nanocomposite powder has a very homogeneous and uniform microstructure and bears a proper flow behavior for use in powder-bed additive manufacturing machines. (c) 2021 Elsevier B.V. All rights reserved.
引用
收藏
页码：319 / 334
页数：16
相关论文
共 63 条
[1]   The use of bulk density measurements as flowability indicators [J].
Abdullah, EC ;
Geldart, D .
POWDER TECHNOLOGY, 1999, 102 (02) :151-165
[2]  
Aguilar-Reyes E. A., 2015, Key Engineering Materials, V631, P247, DOI 10.4028/www.scientific.net/KEM.631.247
[3]   On the measurement of relative powder-bed compaction density in powder-bed additive manufacturing processes [J].
Ali, Usman ;
Mahmoodkhani, Yahya ;
Shahabad, Shahriar Imani ;
Esmaeilizadeh, Reza ;
Liravi, Farzad ;
Sheydaeian, Esmat ;
Huang, Ke Yin ;
Marzbanrad, Ehsan ;
Vlasea, Mihaela ;
Toyserkani, Ehsan .
MATERIALS & DESIGN, 2018, 155 :495-501
[4]   Are ceramic implants a viable alternative to titanium implants? A systematic literature review [J].
Andreiotelli, Marina ;
Wenz, Hans J. ;
Kohal, Ralf-Joachim .
CLINICAL ORAL IMPLANTS RESEARCH, 2009, 20 :32-47
[5]  
ASTM_International, 2013, B21313 ASTM INT
[6]  
ASTM_International, 2009, DTAND TEST METH DET
[7]  
ASTM_International, 2014, F304914 ASTM INT
[8]   Nanoindentation and wear properties of Ti and Ti-TiB composite materials produced by selective laser melting [J].
Attar, H. ;
Ehtemam-Haghighi, S. ;
Kent, D. ;
Okulov, I. V. ;
Wendrock, H. ;
Boenisch, M. ;
Volegov, A. S. ;
Calin, M. ;
Eckert, J. ;
Dargusch, M. S. .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 688 :20-26
[9]   Calcium phosphate-titanium composites for articulating surfaces of load-bearing implants [J].
Bandyopadhyay, Amit ;
Dittrick, Stanley ;
Gualtieri, Thomas ;
Wu, Jeffrey ;
Bose, Susmita .
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS, 2016, 57 :280-288
[10]   3D printing of multifunctional nanocomposites [J].
Campbell, Thomas A. ;
Ivanova, Olga S. .
NANO TODAY, 2013, 8 (02) :119-120
1234567