Formability of tailor welded blanks of aluminium alloy and steel - A review

被引：7

作者：

Deepika, D. ^{[1
]}

Lakshmi, A. Anitha ^{[1
]}

Rao, Ch. Srinivasa ^{[2
]}

Sateesh, N. ^{[3
]}

Nookaraju, B. Ch. ^{[3
]}

Subbiah, Ram ^{[3
]}

机构：

[1] Rangaraju Inst Engn & Technol, Design Mfg, Hyderabad, India

[2] Andhra Univ, Dept Mech Enginering, Visakhapatnam, AP, India

[3] Gokaraju Rangaraju Inst Engn & Technol, Mech Engn, Hyderabad, India

来源：

MATERIALS TODAY-PROCEEDINGS | 2021年 / 46卷

关键词：

Tailor welded blanks; Formability; Friction stir welding; FRICTION; MICROSTRUCTURE; SHEETS;

D O I：

10.1016/j.matpr.2020.12.192

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Aluminum alloys are primarily focused on shipbuilding and aerospace industries due to its special characteristics and low cost, good durability and extreme service conditions. Steel has focused on infrastructure, ships due to its little cost and high tensile strength. The present work studies the formability performance of tailor welded blanks of aluminium alloy and steel materials used in the aerospace and automotive industries. (C) 2021 Elsevier Ltd. All rights reserved.

引用

页码：722 / 728

页数：7

共 17 条

[1] Comparison of different welding methods on mechanical properties and formability behaviors of tailor welded blanks (TWB) made from AA6061 alloys [J].

Bagheri, Behrouz ;

Abbasi, Mahmoud ;

Hamzeloo, Reza .

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2021, 235 (12) :2225-2237

[2] Investigations on the effects of friction stir welding parameters on intermetallic and defect formation in joining aluminum alloy to mild steel [J].

Dehghani, M. ;

Amadeh, A. ;

Mousavi, S. A. A. Akbari .

MATERIALS & DESIGN, 2013, 49 :433-441

[3] Experimental and numerical investigations into the failure mechanisms of friction stir welded AA7075-T6 thin sheets [J].

Entesari, S. ;

Abdollah-zadeh, A. ;

Habibi, N. ;

Mehri, A. .

JOURNAL OF MANUFACTURING PROCESSES, 2017, 29 :74-84

[4] Experimental and numerical assessment of Tailor-Welded Blanks formability [J].

Gaied, Sadok ;

Roelandt, Jean-Marc ;

Pinard, Fabrice ;

Schmit, Francis ;

Balabane, Mikhael .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2009, 209 (01) :387-395

[5]

Kinsey BL, 2011, WOODHEAD PUBL MATER, P1, DOI 10.1533/9780857093851

[6] Experimental and numerical study on formability of friction stir welded TWB sheets based on hemispherical dome stretch tests [J].

Lee, Wonoh ;

Chung, Kyung-Hwan ;

Kim, Daeyong ;

Kim, Junehyung ;

Kim, Chongmin ;

Okamoto, Kazutaka ;

Wagoner, R. H. ;

Chung, Kwansoo .

INTERNATIONAL JOURNAL OF PLASTICITY, 2009, 25 (09) :1626-1654

[7] Friction stir welding and processing [J].

Mishra, RS ;

Ma, ZY .

MATERIALS SCIENCE & ENGINEERING R-REPORTS, 2005, 50 (1-2) :1-78

[8]

Ogawa D., 2018, Q J JAP WELD SOC, V36, P160, DOI [DOI 10.2207/QJJWS.36.160, 10.2207/qjjws.36.160]

[9] Residual stress measurement of Al/steel dissimilar friction stir weld [J].

Ogawa, Daisuke ;

Kakiuchi, Toshifunni ;

Hashiba, Keigo ;

Uematsu, Yoshihiko .

SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2019, 24 (08) :685-694

[10] Experimental and numerical analysis of out-of-plane formability test [J].

Ozturk, F ;

Lee, D .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2005, 170 (1-2) :247-253

← 1 2 →