Ductility enhancement and superelasticity in Fe-Ni-Co-Al-Ti-B polycrystalline alloy

被引：60
|
作者：
Lee, Doyup [1 ]
Omori, Toshihiro [1 ]
Kainuma, Ryosuke [1 ]
机构：
[1] Tohoku Univ, Grad Sch Engn, Dept Mat Sci, Sendai, Miyagi 9808579, Japan
来源：
JOURNAL OF ALLOYS AND COMPOUNDS | 2014年 / 617卷
关键词：
Shape memory; Microstructure; Precipitation; Mechanical properties; MEMORY; TEXTURE;
D O I：
10.1016/j.jallcom.2014.07.136
中图分类号：
O64 [物理化学（理论化学）、化学物理学];
学科分类号：
070304 ; 081704 ;
摘要：
The microstructure, martensitic transformation and superelasticity were examined in Fe-30Ni-15Co-10Al-2.5Ti-0.05B polycrystalline alloy sheets. Thermoelastic transformation was obtained in an aged specimen at 550 degrees C with the gamma (FCC) + gamma' (L1(2)) structure. Moreover, it was found that a {012}< 100 > recrystallization texture was formed and that the high fraction of low energy boundaries was increased in a 98.5% cold-rolled specimen. Suppression of brittle precipitation during aging was directly observed at those boundaries, resulting in improvement of ductility, and superelastic strain of over 4% was obtained in the polycrystalline alloy in a tensile test at room temperature. (C) 2014 Elsevier B.V. All rights reserved.
引用
收藏
页码：120 / 123
页数：4
相关论文
共 50 条
  • [31] Optimising the Al and Ti compositional window for the design of γ' (L12)-strengthened Al-Co-Cr-Fe-Ni-Ti high entropy alloys
    Joseph, J.
    Annasamy, M.
    Kada, S. R.
    Hodgson, P. D.
    Barnett, M. R.
    Fabijanic, D. M.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2022, 835
  • [32] Enhancement in Strength and Ductility of Al-Mg-Si alloy by Cryorolling followed by Warm rolling
    Rao, P. Nageswara
    Kaurwar, Amritha
    Singh, Dharmendra
    Jayaganthan, R.
    INTERNATIONAL CONFERENCE ON MATERIALS FOR ADVANCED TECHNOLOGIES (ICMAT2013), SYMPOSIUM W - ADVANCED STRUCTURAL AND FUNCTIONAL MATERIALS FOR PROTECTION, 2014, 75 : 123 - 128
  • [33] The Enhancement Effect of Carbides on the Printability and Mechanical Properties of a Ni-Fe-Cr-Al-Ti Alloy Processed by Electron Beam Freeform Fabrication
    Yu, Bin
    Wang, Ting
    Wei, Lianfeng
    Jiang, Siyuan
    Zhang, Hongtao
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2024, 55 (03): : 774 - 790
  • [34] Enhancement of strength and ductility in 6061Al alloy processed by cross accumulative roll bonding
    Ou, Ling
    LI, Lin-yan
    Fan, Cai-he
    Nie, Yu-feng
    Yang, Jian-jun
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2023, 33 (07) : 2001 - 2013
  • [35] CHARACTERIZATION OF EQUIMOLAR HIGH-ENTROPY ALLOY FROM Al-Ti-Co-Ni-Fe SYSTEM
    Gorecki, Kamil
    Bala, Piotr
    Cios, Grzegorz
    Tokarski, Tomasz
    Koziel, Tomasz
    METAL 2016: 25TH ANNIVERSARY INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS, 2016, : 1206 - 1209
  • [36] A Ti–Zr–Cu–Ni–Co–Fe–Al–Sn amorphous filler metal for improving the strength of Ti–6Al–4V alloy brazing joint
    Lulu Sun
    Shujie Pang
    Ying Liu
    Huaping Xiong
    Tao Zhang
    ProgressinNaturalScience:MaterialsInternational, 2017, 27 (06) : 687 - 694
  • [37] Ultrastrong High-Ductility Ni35Co35Fe10Al10Ti8B2 High-Entropy Alloy Strengthened with Super-High Concentration L12 Precipitates
    Zhu, Zhichao
    Wang, Mingliang
    He, Tao
    Li, Tianxin
    Di, Yan
    Yan, Hongwei
    Zhang, Yongan
    Lu, Yiping
    ADVANCED ENGINEERING MATERIALS, 2023, 25 (20)
  • [38] A Ti-Zr-Cu-Ni-Co-Fe-Al-Sn amorphous filler metal for improving the strength of Ti-6Al-4V alloy brazing joint
    Sun, Lulu
    Pang, Shujie
    Liu, Ying
    Xiong, Huaping
    Zhang, Tao
    PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL, 2017, 27 (06) : 687 - 694
  • [39] Enhancement of strength-ductility trade-off in Al 5 Fe 25 Cr 25 Ni 42.5 Ti 2.5 high entropy alloy through annealing twins
    Xu, Xiaotao
    Li, Huanqing
    Zhao, Yuhong
    Zhang, Xiaoyang
    Pan, Yue
    Liaw, Peter K.
    Hou, Hua
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2025, 921
  • [40] Partial recrystallization of Ni42Fe30Cr12Mn8Al5Ti3 complex-concentrated alloy to achieve enhanced strength-ductility combination
    Fan, Jiantao
    Ma, Shuo
    Fu, Liming
    Yu, Pengfei
    Li, Gong
    Wen, Mao
    Shan, Aidang
    JOURNAL OF ALLOYS AND COMPOUNDS, 2025, 1020
12345