Cyclic Stability Testing of Aminated-Silica Solid Sorbent for Post-Combustion CO2 Capture

被引：17

作者：

Fisher, James C., II ^{[1
]}

Gray, McMahan ^{[2
]}

机构：

[1] URS Energy & Construct Inc, Natl Energy Technol Lab, Morgantown, WV 26507 USA

[2] Natl Energy Technol Lab, Funct Mat Dev Div, Pittsburgh, PA 15236 USA

来源：

CHEMSUSCHEM | 2015年 / 8卷 / 03期

关键词：

amine; carbon capture; flue gas; silica; sorbents; AMINE SORBENTS; ADSORBENTS; ADSORPTION;

D O I：

10.1002/cssc.201402423

中图分类号：

O6 [化学];

学科分类号：

0703 ;

摘要：

The National Energy Technology Laboratory (NETL) is examining the use of solid sorbents for CO2 removal from coal-fired power plant flue gas streams. An aminated sorbent (previously reported by the NETL) is tested for stability by cyclic exposure to simulated flue gas and subsequent regeneration for 100 cycles. Each cycle was quantified using a traced gas in the simulated flue gas monitored by a mass spectrometer, which allowed for rapid determination of the capacity.

引用

页码：452 / 455

页数：4

共 50 条

[1] Exploring the stability on exposure to acid impurities of polyethyleneimine-functionalized silica for post-combustion CO2 capture
Meng, Yuan
Ju, Tongyao
Han, Siyu
Gao, Yuchen
Liu, Jiwei
Jiang, Jianguo
CHEMICAL ENGINEERING JOURNAL, 2021, 421
[2] Wet impregnation of a commercial low cost silica using DETA for a fast post-combustion CO2 capture process
Martin, C. F.
Sweatman, M. B.
Brandani, S.
Fan, X.
APPLIED ENERGY, 2016, 183 : 1705 - 1721
[3] Phosphorous dendrimer bound polyethyleneimine as solid sorbents for post-combustion CO2 capture
Thompson, Samuel J.
Soukri, Mustapha
Lail, Marty
CHEMICAL ENGINEERING JOURNAL, 2018, 350 : 1056 - 1065
[4] Development of post-combustion CO2 capture system using amine-impregnated solid sorbent
Numaguchi, Ryohei
Fujiki, Junpei
Yamada, Hidetaka
Chowdhury, Firoz A.
Kida, Koji
Goto, Kazuya
Okumura, Takeshi
Yoshizawa, Katsuhiro
Yogo, Katsunori
13TH INTERNATIONAL CONFERENCE ON GREENHOUSE GAS CONTROL TECHNOLOGIES, GHGT-13, 2017, 114 : 2304 - 2312
[5] Aminated poly(vinyl chloride) solid state adsorbents with hydrophobic function for post-combustion CO2 capture
Sneddon, Gregor
McGlynn, Jessica C.
Neumann, Marie S.
Aydin, Halil M.
Yiu, Humphrey H. P.
Ganin, Alexey Y.
JOURNAL OF MATERIALS CHEMISTRY A, 2017, 5 (23) : 11864 - 11872
[6] Solid adsorbent material: A review on trends of post-combustion CO2 capture
Hasan, Hind F.
Al-Sudani, Farah T.
Albayati, Talib M.
Salih, Issam K.
Hharah, Hamed N.
Majdi, Hasan Sh.
Saady, Noori M. Cata
Zendehboudi, Sohrab
Amari, Abdelfattah
Gheni, Saba A.
PROCESS SAFETY AND ENVIRONMENTAL PROTECTION, 2024, 182 : 975 - 988
[7] Post-Combustion CO2 Capture Using Solid Sorbents: A Review
Samanta, Arunkumar
Zhao, An
Shimizu, George K. H.
Sarkar, Partha
Gupta, Rajender
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 2012, 51 (04) : 1438 - 1463
[8] A review of N-functionalized solid adsorbents for post-combustion CO2 capture
Hu, Xiayi
Liu, Libin
Luo, Xiao
Xiao, Gongkui
Shiko, Elenica
Zhang, Rui
Fan, Xianfeng
Zhou, Yefeng
Liu, Yang
Zeng, Zhaogang
Li, Chao'en
APPLIED ENERGY, 2020, 260
[9] Pilot Test Results of Post-Combustion CO2 Capture Using Solid Sorbents
Sjostrom, Sharon
Krutka, Holly
Starns, Travis
Campbell, Tom
10TH INTERNATIONAL CONFERENCE ON GREENHOUSE GAS CONTROL TECHNOLOGIES, 2011, 4 : 1584 - 1592
[10] Epoxide functionalization of a pentaethylenehexamine adsorbent supported on macroporous silica for post-combustion CO2 capture
Cho, A. Ra
Kim, Hana
Won, Yooseob
Lee, Yu-Ri
Kim, Jae-Young
Nam, Hyungseok
Jo, Sung-Ho
Park, Young Cheol
Lee, Dong-Ho
FUEL, 2022, 325

← 1 2 3 4 5 →