Completion of the production of the W7-X divertor target modules

被引：7
|
作者：
Boscary, J. [1 ]
Ehrke, G. [2 ]
Greuner, H. [1 ]
Junghanns, P. [1 ]
Li, C. [1 ]
Mendelevitch, B. [1 ]
Springer, J. [1 ]
Stadler, R. [1 ]
机构：
[1] Max Planck Inst Plasma Phys, Boltzmannstr 2, D-85748 Garching, Germany
[2] Max Planck Inst Plasma Phys, Wendelsteinstr 1, D-17498 Greifswald, Germany
来源：
FUSION ENGINEERING AND DESIGN | 2021年 / 166卷
关键词：
Stellarator; Wendelstein; 7-X; Plasma facing component; Divertor;
D O I：
10.1016/j.fusengdes.2021.112293
中图分类号：
TL [原子能技术]; O571 [原子核物理学];
学科分类号：
0827 ; 082701 ;
摘要：
The installation of an actively water cooled divertor in the stellarator Wendelstein 7-X (W-7X) is mandatory to achieve stationary power and particle exhaust for pulse lengths up to 30 min. The highly loaded divertor area is made of 100 target modules distributed in ten divertor units. The target modules have mechanical support frames with attachment systems to the plasma vessel, and manifolds to distribute water equally between the target elements. A target element is designed to remove a stationary heat flux up to 10 MW/m2 and is made of a CuCrZr copper alloy heat sink armored with CFC NB31 tiles. The manufacturing process, assembly and quality assessment of the last 70 target modules has been successfully completed in the Integrated Technical Centre of IPPGarching. Some parts such as the target elements and manifolds were delivered by industry. The quality was assessed as follows: visual inspections, measurement of the 3-D CFC surface, dynamic pressure tests, He leak testing under pressure at different temperature (20 ?C, 160 ?C) in vacuum oven, high heat flux testing. The production of the water cooled divertor is now completed, and the mounting operation of the target modules in the plasma vessel of W7-X has started.
引用
收藏
页数：4
相关论文
共 50 条
  • [31] Summary of Research and Development Activities for the Production of the Divertor Target Elements of Wendelstein 7-X
    Boscary, Jean
    Peacock, Alan
    Smirnow, Michael
    Tittes, Harald
    IEEE TRANSACTIONS ON PLASMA SCIENCE, 2014, 42 (03) : 533 - 538
  • [32] Repair processes of Wendelstein 7-X target modules
    Junghanns, P.
    Boscary, J.
    Ehrke, G.
    Mendelevitch, B.
    Pichlmair, A.
    Springer, J.
    Stadler, R.
    FUSION ENGINEERING AND DESIGN, 2019, 146 : 1166 - 1170
  • [33] Review of the high heat flux testing as an integrated part of W7-X divertor development
    Greuner, H.
    Boeswirth, B.
    Boscary, J.
    Friedrich, T.
    Lavergne, C.
    Linsmeier, Ch.
    Schlosser, J.
    Wiltner, A.
    FUSION ENGINEERING AND DESIGN, 2009, 84 (2-6) : 848 - 852
  • [34] Multi-scale lumped modeling of micro-channels cooling structure for W7-X divertor unit target module
    Carrone, Francesco
    Difonzo, Rosa
    Fellinger, Joris
    Savoldi, Laura
    FUSION ENGINEERING AND DESIGN, 2024, 204
  • [35] Pre-series and testing route for the serial fabrication of W7-X target elements
    Boscary, J.
    Greuner, H.
    Friedrich, T.
    Traxler, H.
    Mendelevitch, B.
    Boeswirth, B.
    Schlosser, J.
    Smirnow, M.
    Stadler, R.
    FUSION ENGINEERING AND DESIGN, 2009, 84 (2-6) : 497 - 500
  • [36] Manufacturing of the coil support structure for W7-X
    Benito, A.
    Goitia, D.
    Casado, E.
    Anderez, M.
    Vázquez, E.
    Fajardo, M.
    Palacios, C.
    Cardella, A.
    Pilopp, D.
    Giordano, L.
    Di Bartolo, G.
    FUSION ENGINEERING AND DESIGN, 2007, 82 (5-14) : 1579 - 1583
  • [37] Refined Multiphysics Analysis of W7-X Cryopumps
    Zhu, Jiawu
    Bykov, Victor
    Nagel, Michael
    Ehrke, Gunnar
    Fellinger, Joris
    Wegener, Lutz
    Bosch, Hans-Stephan
    IEEE TRANSACTIONS ON PLASMA SCIENCE, 2018, 46 (05) : 1592 - 1602
  • [38] Conceptual design of the W7-X port liners
    Stadler, Reinhold J.
    Peacock, A.
    Boscary, J.
    Mendelevitch, B.
    Scholz, P.
    Schubert, W.
    FUSION ENGINEERING AND DESIGN, 2016, 112 : 492 - 496
  • [39] Local copper coating of the connectors of the divertor target elements of Wendelstein 7-X
    Junghanns, P.
    Boscary, J.
    Busch, M.
    Mendelevitch, B.
    Stadler, R.
    FUSION ENGINEERING AND DESIGN, 2017, 124 : 483 - 486
  • [40] Results of the examinations of the W7-X pre-series target elements
    Boscary, J.
    Boeswirth, B.
    Greuner, H.
    Missirlian, M.
    Schedler, B.
    Scheiber, K.
    Schlosser, J.
    Streibl, B.
    FUSION ENGINEERING AND DESIGN, 2007, 82 (15-24) : 1634 - 1638
12345