Improved transverse flow estimation using differential maximum Doppler frequency

Conventional Doppler technique can only provide the axial component of the blood flow vector, which is actually a three dimensional (3-D) quantity. To acquire the complete flow vector, estimations of the other two velocity components are essential. For the two dimensional (2-D) Doppler-bandwidth-based transverse estimation, however, accuracy is generally limited because of the complex dependence of the Doppler spectral shape on the How variation within the sample volume. Two factors that may lead to the Doppler spectral change were considered in this study. One is the position offset of the sample volume and the other is the length of the sample volume. Simulations were performed and experimental data were also collected. Results indicate that the position offset may result in severe underestimation of Doppler shift frequency. Consequently, Doppler bandwidth is overestimated when it is determined by the difference between Doppler shift frequency and maximum Doppler frequency. Compared with the position offset, influence of the length of sample volume on the Doppler bandwidth is minor. To overcome this problem, a novel method, which is based on the differential maximum Doppler frequency, is proposed. Specifically, two beams with different beam widths are simultaneously generated to observe the blood flow and the difference between the corresponding maximum Doppler frequencies is used to estimate the transverse velocity. It is demonstrated that the accuracy and stability of transverse estimation are significantly improved by the proposed method even when the position offset is present. (E-mail: choushen @mail.ntust.edu.tw) (c) 2007 World Federation for Ultrasound in Medicine & Biology.