A Survey of the Influence of Process Parameters on Mechanical Properties of Fused Deposition Modeling Parts

被引：53

作者：

Gao, Ge ^{[1
]}

Xu, Fan ^{[1
]}

Xu, Jiangmin ^{[1
]}

Tang, Guanghai ^{[1
]}

Liu, Zhenyu ^{[2
]}

机构：

[1] Jiangsu Univ Sci & Technol, Coll Mech Engn, Zhenjiang 212100, Jiangsu, Peoples R China

[2] Chinese Acad Sci, Changchun Inst Opt, Fine Mech & Phys, Changchun 130033, Peoples R China

来源：

MICROMACHINES | 2022年 / 13卷 / 04期

关键词：

additive manufacturing; process parameters; fused deposition modeling; mechanical properties; FDM PROCESS PARAMETERS; TENSILE-STRENGTH; LAYER THICKNESS; POLYMER MATERIALS; BUILD PARAMETERS; SURFACE QUALITY; POLYLACTIC ACID; ABS COMPONENTS; TAGUCHI METHOD; OPTIMIZATION;

D O I：

10.3390/mi13040553

中图分类号：

O65 [分析化学];

学科分类号：

070302 ; 081704 ;

摘要：

Due to the availability of materials and low cost for production, fused deposition modeling is becoming the most widely used additive manufacturing (AM) technology. However, the reasonable choice of process parameters for FDM is a significant task that directly affects the performance of the printed part. Therefore, it is necessary to investigate the influences of various process parameters on the quality characteristics of the components. The objectives of this study are to thoroughly review the current state of research that characterizes, estimates the effects of process parameters on mechanical properties, and summarizes the conclusions of existing works. In addition, some general issues of the presented research are summarized, and the need for future development is also emphasized. Finally, the research proposes several areas that deserve further study in this field.

引用

页数：28

共 196 条

[31] Additive manufacturing of PLA structures using fused deposition modelling: Effect of process parameters on mechanical properties and their optimal selection [J].

Chacon, J. M. ;

Caminero, M. A. ;

Garcia-Plaza, E. ;

Nunez, P. J. .

MATERIALS & DESIGN, 2017, 124 :143-157

[32] Mechanical Properties of FDM Printed PLA Parts before and after Thermal Treatment [J].

Chalgham, Ali ;

Ehrmann, Andrea ;

Wickenkamp, Inge .

POLYMERS, 2021, 13 (08)

[33] Optimization of printing parameters of 3D-printed continuous glass fiber reinforced polylactic acid composites [J].

Chen, Ke ;

Yu, Liguo ;

Cui, Yonghui ;

Jia, Mingyin ;

Pan, Kai .

THIN-WALLED STRUCTURES, 2021, 164

[34] Laser polishing of Cu/PLA composite parts fabricated by fused deposition modeling: Analysis of surface finish and mechanical properties [J].

Chen, Lan ;

Zhang, Xinzhou ;

Wang, Yuan ;

Osswald, Tim A. .

POLYMER COMPOSITES, 2020, 41 (04) :1356-1368

[35] Optimization of FFF Process Parameters by Naked Mole-Rat Algorithms with Enhanced Exploration and Exploitation Capabilities [J].

Chohan, Jasgurpreet Singh ;

Mittal, Nitin ;

Kumar, Raman ;

Singh, Sandeep ;

Sharma, Shubham ;

Dwivedi, Shashi Prakash ;

Saxena, Ambuj ;

Chattopadhyaya, Somnath ;

Ilyas, Rushdan A. ;

Le, Chi Hieu ;

Wojciechowski, Szymon .

POLYMERS, 2021, 13 (11)

[36] Pre and post processing techniques to improve surface characteristics of FDM parts: a state of art review and future applications [J].

Chohan, Jasgurpreet Singh ;

Singh, Rupinder .

RAPID PROTOTYPING JOURNAL, 2017, 23 (03) :495-513

[37] A study on the influence of process parameters on the Mechanical Properties of 3D printed ABS composite [J].

Christiyan, K. G. Jaya ;

Chandrasekhar, U. ;

Venkateswarlu, K. .

2ND INTERNATIONAL MANUFACTURING ENGINEERING CONFERENCE AND 3RD ASIA-PACIFIC CONFERENCE ON MANUFACTURING SYSTEMS (IMEC-APCOMS 2015), 2016, 114

[38]

Constance Z., 2012, Anisotropic Mechanical Properties of ABS Parts Fabricated by Fused Deposition Modelling, V23, P159, DOI [DOI 10.5772/34233, 10.5772/34233.]

[39] Experimental characterization and analytical modelling of the mechanical behaviour of fused deposition processed parts made of ABS-M30 [J].

Croccolo, Dario ;

De Agostinis, Massimiliano ;

Olmi, Giorgio .

COMPUTATIONAL MATERIALS SCIENCE, 2013, 79 :506-518

[40] Characterization of the Mechanical Properties of FFF Structures and Materials: A Review on the Experimental, Computational and Theoretical Approaches [J].

Cuan-Urquizo, Enrique ;

Barocio, Eduardo ;

Tejada-Ortigoza, Viridiana ;

Pipes, R. Byron ;

Rodriguez, Ciro A. ;

Roman-Flores, Armando .

MATERIALS, 2019, 12 (06)

← 1 2 3 4 5 6 7 8 9 10 →