A Survey of the Influence of Process Parameters on Mechanical Properties of Fused Deposition Modeling Parts

被引：53

作者：

Gao, Ge ^{[1
]}

Xu, Fan ^{[1
]}

Xu, Jiangmin ^{[1
]}

Tang, Guanghai ^{[1
]}

Liu, Zhenyu ^{[2
]}

机构：

[1] Jiangsu Univ Sci & Technol, Coll Mech Engn, Zhenjiang 212100, Jiangsu, Peoples R China

[2] Chinese Acad Sci, Changchun Inst Opt, Fine Mech & Phys, Changchun 130033, Peoples R China

来源：

MICROMACHINES | 2022年 / 13卷 / 04期

关键词：

additive manufacturing; process parameters; fused deposition modeling; mechanical properties; FDM PROCESS PARAMETERS; TENSILE-STRENGTH; LAYER THICKNESS; POLYMER MATERIALS; BUILD PARAMETERS; SURFACE QUALITY; POLYLACTIC ACID; ABS COMPONENTS; TAGUCHI METHOD; OPTIMIZATION;

D O I：

10.3390/mi13040553

中图分类号：

O65 [分析化学];

学科分类号：

070302 ; 081704 ;

摘要：

Due to the availability of materials and low cost for production, fused deposition modeling is becoming the most widely used additive manufacturing (AM) technology. However, the reasonable choice of process parameters for FDM is a significant task that directly affects the performance of the printed part. Therefore, it is necessary to investigate the influences of various process parameters on the quality characteristics of the components. The objectives of this study are to thoroughly review the current state of research that characterizes, estimates the effects of process parameters on mechanical properties, and summarizes the conclusions of existing works. In addition, some general issues of the presented research are summarized, and the need for future development is also emphasized. Finally, the research proposes several areas that deserve further study in this field.

引用

页数：28

共 196 条

[1]

Abouelmajd Mohamed, 2021, International Journal for Simulation and Multidisciplinary Design Optimization, DOI [10.1051/smdo/2021031, 10.1051/smdo/2021031]

[2] Anisotropic material properties of fused deposition modeling ABS [J].

Ahn, SH ;

Montero, M ;

Odell, D ;

Roundy, S ;

Wright, PK .

RAPID PROTOTYPING JOURNAL, 2002, 8 (04) :248-257

[3] Effect of Filling Pattern on the Tensile and Flexural Mechanical Properties of FDM 3D Printed Products [J].

Akhoundi, B. ;

Behravesh, A. H. .

EXPERIMENTAL MECHANICS, 2019, 59 (06) :883-897

[4] Experimental Optimization of Fused Deposition Modelling Processing Parameters: a Design-for-Manufacturing Approach [J].

Alafaghani, Ala'aldin ;

Qattawi, Ala ;

Alrawi, Buraaq ;

Guzman, Arturo .

45TH SME NORTH AMERICAN MANUFACTURING RESEARCH CONFERENCE (NAMRC 45), 2017, 10 :791-803

[5] Fracture resistance measurement of fused deposition modeling 3D printed polymers [J].

Aliheidari, Nahal ;

Tripuraneni, Rajasekhar ;

Ameli, Amir ;

Nadimpalli, Siva .

POLYMER TESTING, 2017, 60 :94-101

[6] Investigating the influence of infill percentage on the mechanical properties of fused deposition modelled ABS parts [J].

Alvarez C, Kenny L. ;

Lagos C, Rodrigo F. ;

Aizpun, Miguel .

INGENIERIA E INVESTIGACION, 2016, 36 (03) :110-116

[7]

Aminzadeh A., 2021, Metaheuristic approaches for modeling and optimization of FDM process, P483

[8] Investigation of the mechanical properties and porosity relationships in fused deposition modelling-fabricated porous structures [J].

Ang, Ker Chin ;

Leong, Kah Fai ;

Chua, Chee Kai ;

Chandrasekaran, Margam .

RAPID PROTOTYPING JOURNAL, 2006, 12 (02) :100-105

[9] Critical parameters influencing the quality of prototypes in fused deposition modelling [J].

Anitha, R ;

Arunachalam, S ;

Radhakrishnan, P .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2001, 118 (1-3) :385-388

[10]

[Anonymous], 2018, INT RES J ENG TECHNO

← 1 2 3 4 5 6 7 8 9 10 →