Microstructure and mechanical performance of new Al0.5CrFe1.5MnNi0.5 high-entropy alloys improved by plasma nitriding

被引：49

作者：

Tang, Wei-Yeh ^{[1
]}

Chuang, Ming-Hao ^{[1
]}

Chen, Hsuan-You ^{[1
]}

Yeh, Jien-Wei ^{[1
]}

机构：

[1] Natl Tsing Hua Univ, Dept Mat Sci & Engn, Hsinchu 300, Taiwan

来源：

SURFACE & COATINGS TECHNOLOGY | 2010年 / 204卷 / 20期

关键词：

High-entropy alloys; Plasma nitriding; rho Phase; Sliding wear; WEAR-RESISTANCE; SYSTEM; FCC;

D O I：

10.1016/j.surfcoat.2010.02.045

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Effects of plasma nitriding at 525 degrees C on microstructure and mechanical performance of a brand-new Al0.5CrFe1.5MnNi0.5 high-entropy alloy (HEA) were investigated. This alloy exhibits a large age hardening effect at temperatures from 600 to 800 degrees C and can be well-nitrided in the as-cast condition or the homogenized and furnace-cooled state. The nitrided layer has a thickness around 75 mu m and a peak hardness level of Hv 1250 near the surface. The nitrided Al0.5CrFe1.5MnNi0.5 alloys exhibit superior adhesive wear resistance to conventional nitrided steels by 25-54 times due to their much thicker highly-hardened layer and higher peak hardness than that of conventional steels. (C) 2010 Elsevier B.V. All rights reserved.

引用

页码：3118 / 3124

页数：7

共 50 条

[21] Analysis of Microstructure and Sliding Wear Behavior of Co1.5CrFeNi1.5Ti0.5 High-Entropy Alloy
Lentzaris, K.
Poulia, A.
Georgatis, E.
Lekatou, A. G.
Karantzalis, A. E.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2018, 27 (10) : 5177 - 5186
[22] Effects of Al addition on the microstructure and mechanical property of AlxCoCrFeNi high-entropy alloys
Wang, Woei-Ren
Wang, Wei-Lin
Wang, Shang-Chih
Tsai, Yi-Chia
Lai, Chun-Hui
Yeh, Jien-Wei
INTERMETALLICS, 2012, 26 : 44 - 51
[23] Microstructure and mechanical properties of Al0.4Co0.5V0.6FeNi high-entropy alloys processed by homogenization treatment
Li, Yuan
Yang, Zhong
Duan, Hongbo
Ma, Zhijun
Wu, Chao
Bai, Yaping
Sun, Chongfeng
Wang, Ping
Li, Jianping
INTERMETALLICS, 2023, 159
[24] Effects of Tungsten on Microstructure and Mechanical Properties of CrFeNiV0.5Wx and CrFeNi2V0.5Wx High-Entropy Alloys
Hui Jiang
Li Jiang
Kaiming Han
Yiping Lu
Tongmin Wang
Zhiqiang Cao
Tingju Li
Journal of Materials Engineering and Performance, 2015, 24 : 4594 - 4600
[25] Microstructure, Mechanical Properties and Corrosion Resistance of the Mo0.5V0.5NbTiZrx High-Entropy Alloys with Low Thermal Neutron Sections
Xiang, Chao
Han, En-Hou
Zhang, Zhiming
Fu, Huameng
Zhang, Haifeng
Wang, Jianqiu
Hu, Guodong
ACTA METALLURGICA SINICA-ENGLISH LETTERS, 2024, 37 (10) : 1643 - 1656
[26] Effect of Boron on the Microstructure, Phase Assemblage and Wear Properties of Al0.5CoCrCuFeNi High-Entropy Alloy
Liu Xiaotao
Lei Wenbin
Ma Lijuan
Liu Jinling
Liu Jing
Cui Jianzhong
RARE METAL MATERIALS AND ENGINEERING, 2016, 45 (09) : 2201 - 2207
[27] Mechanical and tribological performance of AlCr0.5NbTaxTi4-x ( x=0, 0.5, 1) refractory high-entropy alloys
Li, Haozhe
Li, Xiaolin
Jin, Chi
Li, Qian
Ma, Qiang
Hua, Ke
Wang, Haifeng
Liu, Weimin
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2023, 156 : 241 - 253
[28] Effect of Nb Content on Microstructure and Mechanical Properties of Mo0.25V0.25Ti1.5Zr0.5Nbx High-Entropy Alloys
Zhang, Fengqi
Xiang, Chao
Han, En-Hou
Zhang, Zijian
ACTA METALLURGICA SINICA-ENGLISH LETTERS, 2022, 35 (10) : 1641 - 1652
[29] Microstructure and Mechanical Properties of a New Al0.5CrFeMnCo2 High Entropy Alloy
Zhang, Yang
Shen, Yang
Chen, Xiaoyang
Sun, Shunping
Cong, Mengqi
Li, Yanlei
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2024, 77 (11) : 3683 - 3689
[30] Cooling-Rate Effect on Microstructure and Mechanical Properties of Al0.5CoCrFeNi High-Entropy Alloy
Xiong, Ke
Huang, Lin
Wang, Xiaofeng
Yu, Lin
Feng, Wei
METALS, 2022, 12 (08)

← 1 2 3 4 5 →