Scalable and environmentally friendly mechanochemical synthesis of nanocrystalline rhodostannite (Cu2FeSn3S8)

This study demonstrates scalable mechanochemical synthesis of rhodostannite Cu2FeSn3S8 nanocrystals. On the contrary to the previous reports focused on the synthesis of stannite Cu2FeSnS4 reporting the rhodostannite impurity, we succeeded in preparing stannite-free product after milling. Pure elements were used for a solvent-free production in a batch of 100 g using an eccentric vibratory mill. The progress of the synthesis was monitored by X-ray diffraction and magnetometry, which both confirmed a successful reaction progress until 6 h of milling. However, further treatment (until 10 h) did not result in an improvement, as quite a high saturation magnetization (7.8 emu/g) and clearly evident diffraction at around 44 degrees in the XRD pattern of the product due to the presence of ferromagnetic un-reacted iron with content slightly above 5% was evidenced. The product is sulfur- and tin-deficient, with crystallite size of around 12 nm. In-depth SEM/EDS analysis has shown the inhomogeneity of Fe distribution due to unfinished reaction. The bandgap of the produced material was 1.29 eV. The spark plasma sintering treatment resulted in complete consumption of non-reacted iron, but partial decomposition to stannite Cu2FeSnS4 was observed. The product is an intrinsic semiconductor with high electrical resistivity, and is therefore unsuitable for thermoelectric application. However, its thermal conductivity is low, thus it could be used as an electrically and thermally insulating material. (C) 2021 Published by Elsevier B.V.