The effect of post-weld heat treatment on the mechanical properties of 2024-T4 friction stir-welded joints

被引：121

作者：

Aydin, Hakan ^{[1
]}

Bayram, Ali ^{[1
]}

Durgun, Ismail ^{[2
]}

机构：

[1] Uludag Univ, Dept Mech Engn, Fac Engn & Architecture, TR-16059 Gorukle, Turkey

[2] Turk Otomobil Fabrikasi AS, Tofas Fiat, TR-16369 Bursa, Turkey

来源：

MATERIALS & DESIGN | 2010年 / 31卷 / 05期

关键词：

Heat treatments; Welding; Mechanical; ABNORMAL GRAIN-GROWTH; ALUMINUM-ALLOY JOINTS; TENSILE PROPERTIES; FRACTURE-BEHAVIOR; MICROSTRUCTURE;

D O I：

10.1016/j.matdes.2009.11.030

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

In this study, the effect of post-weld heat treatment (PWHT) on the mechanical properties of friction stir-welded 2024 aluminum alloys in the T4 temper state was investigated. Solution heat treatment and various ageing treatments were given to the welded joints. The PWHT procedures caused abnormal coarsening of the grains in the weld zone, which resulted in a drop in micro-hardness at the weld zone compared to the base material of the joints. T6 (190 degrees C - 10 h) ageing treatment after welding was found to be more beneficial than the other heat treatments in enhancing the mechanical properties of the 2024-T4 joints. However, the T6 (190 degrees C - 10 h) heat treatment led to significant ductility deterioration in the joint. (C) 2009 Elsevier Ltd. All rights reserved.

引用

页码：2568 / 2577

页数：10

共 25 条

[1] Friction stir welding parameters: a tool for controlling abnormal grain growth during subsequent heat treatment
Attallah, MM
Salem, HG
[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2005, 391 (1-2): : 51 - 59
[2] Tensile properties of friction stir welded joints of 2024 aluminum alloys in different heat-treated-state
Aydin, Hakan
Bayram, Ali
Uguz, Agah
Akay, Kemal Sertan
[J]. MATERIALS & DESIGN, 2009, 30 (06) : 2211 - 2221
[3] BACKLUND J, 1998, P 7 INT C JOINTS AL
[4] TEM analysis of a friction stir-welded butt joint of Al-Si-Mg alloys
Cabibbo, M
Meccia, E
Evangelista, E
[J]. MATERIALS CHEMISTRY AND PHYSICS, 2003, 81 (2-3) : 289 - 292
[5] Abnormal grain growth in friction stir processed alloys
Charit, I.
Mishra, R. S.
[J]. SCRIPTA MATERIALIA, 2008, 58 (05) : 367 - 371
[6] Multi-sheet structures in 7475 aluminum by friction stir welding in concert with post-weld superplastic forming
Charit, I
Mishra, RS
Mahoney, MW
[J]. SCRIPTA MATERIALIA, 2002, 47 (09) : 631 - 636
[7] Chen CY, 2006, J MATER SCI, V41, P297
[8] Stability of the grain structure in 2219-O aluminum alloy friction stir welds during solution treatment
Chen, Y. C.
Feng, J. C.
Liu, H. J.
[J]. MATERIALS CHARACTERIZATION, 2007, 58 (02) : 174 - 178
[9] Influences of post-weld heat treatment on tensile properties of friction stir-welded AA6061 aluminum alloy joints
Elangovan, K.
Balasubramanian, V.
[J]. MATERIALS CHARACTERIZATION, 2008, 59 (09) : 1168 - 1177
[10] GARIBOLDI E, 2009, FRACTURE TOUGHNESS M

← 1 2 3 →