Ultrasonicated Direct Chill Clad Casting of Magnesium Alloy: A Computational Approach

被引：1
作者：
Chopra, Kunal [1 ]
Rao, A. K. Prasada [1 ]
机构：
[1] BML Munjal Univ, Dept Mech Engn, SoET, Gurgaon 122413, India
来源：
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS | 2019年 / 72卷 / 12期
关键词：
Direct chill casting; Cladding; Magnesium alloy; Solidification; Simulation; ALUMINUM-ALLOYS; DC; MODEL; METALS; SOUND; INGOT; HEAT;
D O I：
10.1007/s12666-019-01768-z
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
The current work introduces a new process ultrasonicated direct chill clad casting (UDCC) and discusses a computational fluid dynamics model of combined solidification of AZ31 alloy billet with A356 alloy as cladding, using ANSYS. The geometry, boundary conditions and casting parameters considered in the present work are of industrial scale. Computations were performed at various casting speeds to understand the profiles of the temperature, clad interface and solid fraction. The solidification phenomena of direct chill clad casting process (DCC) and UDCC were critically discussed herein.
引用
收藏
页码：3027 / 3033
页数：7
相关论文
共 50 条
  • [21] Transient Modeling of Grain Structure and Macrosegregation during Direct Chill Casting of Al-Cu Alloy
    Chen, Qipeng
    Li, Hongxiang
    Shen, Houfa
    PROCESSES, 2019, 7 (06):
  • [22] The Effect of Water Ejection and Rewetting Phenomena on Hot Cracking Sensitivity during Direct Chill Casting of Magnesium Alloy
    Putta, Sai Divya Venkata
    Penumakala, Pavan Kumar
    Nallathambi, Ashok Kumar
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2023, 32 (13) : 5756 - 5771
  • [23] The Effect of Water Ejection and Rewetting Phenomena on Hot Cracking Sensitivity during Direct Chill Casting of Magnesium Alloy
    P. V. Sai Divya
    P. K. Penumakala
    A. K. Nallathambi
    Journal of Materials Engineering and Performance, 2023, 32 : 5756 - 5771
  • [24] Microstructure and mechanical properties of Al-1Mn and Al-10Si alloy circular clad ingot prepared by direct chill casting
    Fu, Ying
    Jie, Jinchuan
    Wu, Li
    Park, Joonpyo
    Sun, Jianbo
    Kim, Jongho
    Li, Tingju
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2013, 561 : 239 - 244
  • [25] Direct chill casting of Φ500mm ZK60 magnesium alloy billets under low frequency electromagnetic field
    Zhang, Z. Q.
    Le, Q. C.
    Cui, J. Z.
    ADVANCED STRUCTURAL MATERIALS, 2011, 686 : 26 - 29
  • [26] Effect of clad ratio on interfacial microstructure and properties of cladding billets via direct-chill casting process
    Zhang, Hai-tao
    Han, Xing
    Wang, Dong-tao
    Shao, Bo
    Qin, Ke
    Cui, Jian-zhong
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2018, 28 (05) : 998 - 1006
  • [27] Initial Development of Micro-Shrinkage Crack During Early Stages of Direct Chill Casting of Al-4.5% Cu Alloy
    El-Bealy, M. O.
    LIGHT METALS 2016, 2016, : 657 - 662
  • [28] Simulation Study of Al-1Mn/Al-10Si Circular Clad Ingots Prepared by Direct Chill Casting
    Wu, Li
    Kang, Huijun
    Chen, Zongning
    Fu, Ying
    Wang, Tongmin
    METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2016, 47 (01): : 89 - 98
  • [29] Effects of Casting Parameters on Macrosegregation in 2024 Alloy During Direct-chill Casting Based on Numerical Simulation
    Luo Haijun
    Jie Wanqi
    Gao Zhiming
    Zheng Yongjian
    RARE METAL MATERIALS AND ENGINEERING, 2019, 48 (09) : 2759 - 2767
  • [30] Forgeability and die-forging forming of direct chill casting Mg-Nd-Zn-Zr magnesium alloy
    Zheng, Xingwei
    Dong, Jie
    Yin, Dongdi
    Liu, Wencai
    Wang, Fenghua
    Jin, Li
    Ding, Wenjiang
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 527 (16-17): : 3690 - 3694
12345