A new method for recovering rare earth elements from the hyperaccumulating fern Dicranopteris linearis from China

被引:22
作者
Jally, Bastien [1 ,2 ]
Laubie, Baptiste [1 ]
Chour, Zeinab [1 ]
Muhr, Laurence [1 ]
Qiu, Rongliang [2 ]
Morel, Jean Louis [3 ]
Tang, Yetao [2 ]
Simonnot, Marie-Odile [1 ]
机构
[1] Univ Lorraine, CNRS, LRGP, F-54000 Nancy, France
[2] Sun Yat Sen Univ, Sch Environm Sci & Engn, Guangzhou 510275, Peoples R China
[3] Univ Lorraine, LSE, INRAE, F-54000 Nancy, France
关键词
Rare earth elements; Dicranopteris linearis; Recovery; Agromining; Phytomining; Hydrometallurgy; COAL FLY-ASH; PHASE; EXTRACTION; CHEMISTRY; DICHOTOMA; ALUMINA; BROWNFIELDS; IMPACTS; ACID; REE;
D O I
10.1016/j.mineng.2021.106879
中图分类号
TQ [化学工业];
学科分类号
0817 ;
摘要
Hyperaccumulator plants are new alternative sources for elements of interest e.g., nickel, rare-earth elements (REEs), as concentrations in their aerial parts are higher than in common low-grade ores. The fern Dicranopteris linearis naturally grows on former mine tailings in Southern China and is classified as a REE hyperaccumulator. The efficient recovery of REEs is fundamental to ensure economic viability and to limit the environmental impact of the process. This study presents a novel approach for the treatment of the Dicranopteris biomass after incineration to ash to drastically improve the ?bio-ore? grade and to generate heat. Ash structure and composition is described, and challenges for efficient recovery of REEs are discussed. A pre-processing step, aiming at rendering the REEs available for extraction, was designed to dissolve aluminum (Al) using concentrated sodium hydroxide (6 M) at an average temperature (80 ?C). The operating parameters were investigated through experiment methodology design and parametric studies to build an empirical model. Additional experiments revealed that the formation of insoluble aluminosilicate compounds limited the removal of aluminium. Rinsing the REE-rich residue proved to be effective to increase the REE concentration and was carefully designed. Subsequently, the REEs were extracted under mildly acidic conditions using nitric acid (25 ?C, pH 4.8), producing a valuable solution devoid of aluminium and containing 74% of the REEs.
引用
收藏
页数:11
相关论文
共 67 条
  • [1] [Anonymous], PHYTOREMEDIATION CON, P85
  • [2] Armstrong J.A., 1999, THESIS LOUGHBOROUGH
  • [3] Baker AJM, 2000, PHYTOREMEDIATION OF CONTAMINATED SOIL AND WATER, P85
  • [4] A new process for nickel ammonium disulfate production from ash of the hyperaccumulating plant Alyssum murale
    Barbaroux, R.
    Plasari, E.
    Mercier, G.
    Simonnot, M. O.
    Morel, J. L.
    Blais, J. F.
    [J]. SCIENCE OF THE TOTAL ENVIRONMENT, 2012, 423 : 111 - 119
  • [5] The mechanism of the sodalite-to-cancrinite phase transformation in synthetic spent Bayer liquor
    Barnes, MC
    Addai-Mensah, J
    Gerson, AR
    [J]. MICROPOROUS AND MESOPOROUS MATERIALS, 1999, 31 (03) : 287 - 302
  • [6] Bialecka B, 2013, GOSPOD SUROWCAMI MIN
  • [7] Towards zero-waste valorisation of rare-earth-containing industrial process residues: a critical review
    Binnemans, Koen
    Jones, Peter Tom
    Blanpain, Bart
    Van Gerven, Tom
    Pontikes, Yiannis
    [J]. JOURNAL OF CLEANER PRODUCTION, 2015, 99 : 17 - 38
  • [8] From phytoremediation of soil contaminants to phytomanagement of ecosystem services in metal contaminated sites
    Burges, Aritz
    Alkorta, Itziar
    Epelde, Lur
    Garbisu, Carlos
    [J]. INTERNATIONAL JOURNAL OF PHYTOREMEDIATION, 2018, 20 (04) : 384 - 397
  • [9] Thermogravimetric analysis as a new method to determine the lignocellulosic composition of biomass
    Carrier, Marion
    Loppinet-Serani, Anne
    Denux, Dominique
    Lasnier, Jean-Michel
    Ham-Pichavant, Frederique
    Cansell, Francois
    Aymonier, Cyril
    [J]. BIOMASS & BIOENERGY, 2011, 35 (01) : 298 - 307
  • [10] Solution-chemistry analysis of ammonium bicarbonate consumption in rare-earth-element precipitation
    Chi, R
    Hu, Y
    Zhu, G
    Xu, S
    Zhou, Z
    Xu, Z
    [J]. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2003, 34 (05): : 611 - 617