Forward kinematics and workspace analysis for a 7-DOF cable-driven humanoid arm

被引：8
作者：
Chen, Weihai [1 ]
Chen, Quanzhu [2 ]
Zhang, Jianbin [2 ]
Yu, Shouqian [1 ]
机构：
[1] Beijing Univ Aeronaut & Astronaut, Sch Automat Sci & Elect Engn, Beijing 100083, Peoples R China
[2] Beijing Univ Aeronaut & Astronaut, Sch Mech Engn & Automat, Beijing 100083, Peoples R China
来源：
2006 IEEE INTERNATIONAL CONFERENCE ON ROBOTICS AND BIOMIMETICS, VOLS 1-3 | 2006年
关键词：
cable-driven; redurdant kinematics; parallel mechanism;
D O I：
10.1109/ROBIO.2006.340095
中图分类号：
TP [自动化技术、计算机技术];
学科分类号：
0812 ;
摘要：
Cable-driven mechanisms have high load capacity. Motivating from the latest research results of humanoid-arm bionics and parallel manipulators, a novel design of cable-driven humanoid-arm, which combines the merits of cable-driven and parallel mechanism, is proposed. This paper introduces the specific structure of cable-driven humanoid arm. The modes of cables distribution and the coupling among joints are also studied. With analysis of the four-cable approach to drive 3-DOF parallel mechanism the relationships between cable lengths and joint angles is analyzed, the motion ranges of joint angles are also discussed. Based on the analysis above, forward kinematics and workspace of the manipulator are analyzed, the pose of end-effector relating to base frame is deduced. At last, according to three groups of kinematic solutions, a simulation by ADAMS is carried out to verify the effectiveness of proposed algorithms.
引用
收藏
页码：1175 / +
页数：2
相关论文
共 50 条
[31]   Forward kinematics analysis of parallel mechanisms with restricted workspace [J].
Geng, Mingchao ;
Zhao, Tieshi ;
Wang, Chang ;
Chen, Yuhang ;
Li, Erwei .
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2015, 229 (14) :2561-2572
[32]   Design and Modeling of a Novel Cable-Driven Elbow Joint Module for Humanoid Arms [J].
Liang, Zhihao ;
Guan, Yisheng ;
Xiang, Chaoqun ;
Song, Yaowei .
2021 IEEE INTERNATIONAL CONFERENCE ON ROBOTICS AND BIOMIMETICS (IEEE-ROBIO 2021), 2021, :1264-1269
[33]   A Forward Kinematics Solution Method for Cable-Driven Hyper-Redundant Manipulators Based on Self-attention Mechanism [J].
Wang, Tianao ;
Leong, Zhenghao Nigel ;
Wang, Guolei .
INTELLIGENT ROBOTICS AND APPLICATIONS, ICIRA 2024, PT IX, 2025, 15209 :397-407
[34]   Trajectory tracking control of a 2-DOF cable-driven parallel mechanism [J].
Jiang L.-J. ;
Gao B.-T. ;
Liu C.-D. ;
Zhu Z.-Y. .
Kongzhi yu Juece/Control and Decision, 2019, 34 (05) :1103-1108
[35]   Design of a 6-DOF Aerial Hybrid Cable-Driven Parallel Manipulator [J].
Zhang, Kong ;
Hao, Guangbo ;
Pakrashi, Vikram ;
Murphy, Jimmy ;
Long, Philip .
2024 20TH IEEE/ASME INTERNATIONAL CONFERENCE ON MECHATRONIC AND EMBEDDED SYSTEMS AND APPLICATIONS, MESA 2024, 2024,
[36]   Motion Control of a 4-DOF Cable-Driven Upper Limb Exoskeleton [J].
Wang, Jianhua ;
Li, Wang ;
Chen, Weihai ;
Zhang, Jianbin .
PROCEEDINGS OF THE 2019 14TH IEEE CONFERENCE ON INDUSTRIAL ELECTRONICS AND APPLICATIONS (ICIEA 2019), 2019, :2129-2134
[37]   Modeling and analysis of a cable-driven serial-parallel manipulator [J].
Liu, Fei ;
Song, Zhendong ;
Ma, Jinping .
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2024, 238 (04) :1012-1028
[38]   Design and Nonlinear Modeling of a Modular Cable-Driven Soft Robotic Arm [J].
Qi, Xinda ;
Mei, Yu ;
Chen, Dong ;
Li, Zhaojian ;
Tan, Xiaobo .
IEEE-ASME TRANSACTIONS ON MECHATRONICS, 2024, 29 (04) :3083-3091
[39]   Dynamic Control with Tension Compensation of a 3-DOF Cable-driven Parallel Manipulator [J].
Zhang, Bingyuan ;
Shang, Weiwei ;
Cong, Shuang .
2017 IEEE INTERNATIONAL CONFERENCE ON CYBERNETICS AND INTELLIGENT SYSTEMS (CIS) AND IEEE CONFERENCE ON ROBOTICS, AUTOMATION AND MECHATRONICS (RAM), 2017, :508-513
[40]   Dynamic Control of a 3-DOF Cable-Driven Robot Based on Backstepping Technique [J].
You, Xianqiang ;
Chen, Weihai ;
Yu, Shouqian ;
Wu, Xingming .
2011 6TH IEEE CONFERENCE ON INDUSTRIAL ELECTRONICS AND APPLICATIONS (ICIEA), 2011, :1302-1307
12345