Investigation on microstructure and mechanical properties of diffusion bonded Al/Mg2Si metal matrix composite using copper interlayer

被引：27
|
作者：
Nami, H. [1 ]
Halvaee, A. [1 ]
Adgi, H. [1 ]
Hadian, A. [1 ]
机构：
[1] Univ Tehran, Sch Met & Mat Engn, Fac Engn, Tehran, Iran
来源：
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY | 2010年 / 210卷 / 10期
关键词：
Diffusion bonding; Mechanical properties; Microstructure; Copper interlayer; TITANIUM;
D O I：
10.1016/j.jmatprotec.2010.03.015
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Diffusion bonding of Al/Mg2Si metal matrix composite (MMC) using Cu interlayer at optimal bonding temperature of 5405 degrees C for various bonding durations was investigated This metal matrix composite (MMC) containing 15% Mg2Si particles was produced by in situ technique Specific diffusion bonding process was introduced as a low vacuum technique The composition and microstructure of the joined areas were examined by X-ray diffraction (XRD) and scanning electron microscopy equipped with energy dispersive X-ray spectroscopy (EDS) Microhardness and shear tests were conducted to the samples to evaluate the effect of bonding duration on weldability Several different diffusion layers exist at the bond region depending on the bonding duration The shear strength of Joints increased with bonding duration due to elimination of CuAl2 brittle diffusion layer (C) 2010 Elsevier B V All rights reserved
引用
收藏
页码：1282 / 1289
页数：8
相关论文
共 50 条
  • [1] Transient liquid phase diffusion bonding of Al/Mg2Si metal matrix composite
    Nami, H.
    Halvaee, A.
    Adgi, H.
    MATERIALS & DESIGN, 2011, 32 (07) : 3957 - 3965
  • [2] On the Role of Bonding Time on Microstructure and Mechanical Properties of TLP Bonded Al/Mg2Si Composite
    Ghayoor, Milad
    Hadian, Ali M.
    JOURNAL OF COMPOSITES SCIENCE, 2019, 3 (03):
  • [3] Microstructure and mechanical properties of diffusion-bonded Mg-Al joints using silver film as interlayer
    Wang, Yiyu
    Luo, Guoqiang
    Zhang, Jian
    Shen, Qiang
    Zhang, Lianmeng
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2013, 559 : 868 - 874
  • [4] Effect of ultrasonic stirring on the microstructure and mechanical properties of in situ Mg2Si/Al composite
    Lin, Jixing
    Bai, Guangzhu
    Liu, Zheng
    Niu, Liyuan
    Li, Guangyu
    Wen, Cuie
    MATERIALS CHEMISTRY AND PHYSICS, 2016, 178 : 112 - 118
  • [5] Effect of Ce Inoculation on Microstructure and Mechanical Properties of in situ Al–20%Mg2Si Composite
    Yingmin Li
    Tongyu Liu
    Shengyuan Chen
    Yuyan Ren
    International Journal of Metalcasting, 2019, 13 : 331 - 336
  • [6] Effect of Ce Inoculation on Microstructure and Mechanical Properties of in situ Al-20%Mg2Si Composite
    Li, Yingmin
    Liu, Tongyu
    Chen, Shengyuan
    Ren, Yuyan
    INTERNATIONAL JOURNAL OF METALCASTING, 2019, 13 (02) : 331 - 336
  • [7] The effect of Cu on microstructure, mechanical properties and fracture behavior of Al-15 %Mg2Si composite
    Zou, Xue
    Liu, Tongyu
    Liu, Weihua
    Wang, Feng
    Li, Yingmin
    Su, Ruiming
    Shi, Ling
    JOURNAL OF ALLOYS AND COMPOUNDS, 2025, 1012
  • [8] The effects of Mg2Si(p) on microstructure and mechanical properties of AA332 composite
    Zainon, Fizam
    Ahmad, Khairel Rafezi
    Daud, Ruslizam
    ADVANCES IN MATERIALS RESEARCH-AN INTERNATIONAL JOURNAL, 2016, 5 (01): : 55 - 66
  • [9] Low-temperature partial transient liquid phase diffusion bonding of Al/Mg2Si metal matrix composite to AZ91D using Al-based interlayer
    Atabaki, M. Mazar
    Idris, J.
    MATERIALS & DESIGN, 2012, 34 : 832 - 841
  • [10] The microstructure and mechanical characterization of Al-30%Mg2Si composite with Y inoculation addition
    Liu, Tongyu
    Li, Yingmin
    Ren, Yuyan
    Wang, Winxin
    MATERIALS RESEARCH EXPRESS, 2018, 5 (07)
12345