Effect of Temper Rolling on Final Shape Defects in a V-section Roll Forming Process

Roll forming is a continuous process in which a flat strip is shaped to the desired profile by sequential bending in a series of roll stands. Because of the large variety of applications of roll forming in the industry, Finite Element Analysis (FEA) is increasingly utilized for roll forming process design. Bending is the dominant deformation mode in roll forming. Sheet materials used in this process are generally temper rolled, roller- or tension- leveled. These processes introduce residual stresses into the material, and recent studies have shown that those affect the material behavior in bending. In this study a numerical model of the temper rolling (skin passing) process was used to determine a residual stress distribution in a dual phase, DP780, steel strip. A 5-stand roll forming process for the forming of a V-section was modeled, and the effect of various thickness reduction levels in the temper rolling process on the final shape defects was analyzed. The results show that a small thickness reduction in the temper rolling process decreases the maximum bow height but the final springback angle increases. It is also shown that reasonable model accuracy can be achieved by including the residual stress information due to temper rolling as initial condition in the numerical modeling of a roll forming process.