Defect detection and imaging using focused ultrasonic guided waves

被引：0
|
作者：
Sicard, R. [1 ]
Serhan, H. [1 ]
机构：
[1] TecScan Syst Inc, Boucherville, PQ J4B 6Y4, Canada
来源：
REVIEW OF PROGRESS IN QUANTITATIVE NONDESTRUCTIVE EVALUATION, VOLS 26A AND 26B | 2007年 / 894卷
关键词：
guided waves; phased array; imaging; focusing;
D O I：
暂无
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The use of numerical and phased focusing to perform guided wave inspection of plates and pipes has not been widely used. Such inspection technique represents an interesting solution for defect detection and localization. In addition, imaging of ultrasonic guided waves inspection using color coded B-Scans is also considered a highly valuable tool for data interpretation. The present paper presents an experimental study for the implementation of focal law algorithms applied to the inspection of plate structures using ultrasonic Lamb waves generated by the angle beam wedge method. The wedge properties and the considerations for the image representation are outlined in this work. A comparison between spike and tone burst excitation is also performed, demonstrating the feasibility of the Lamb wave inspection technique with both type of excitations.
引用
收藏
页码：185 / +
页数：2
相关论文
共 50 条
  • [21] Review of synthetically focused guided wave imaging techniques with application to defect sizing
    Davies, J
    Simonetti, F
    Lowe, M
    Cawley, P
    REVIEW OF PROGRESS IN QUANTITATIVE NONDESTRUCTIVE EVALUATION, VOLS 25A AND 25B, 2006, 820 : 142 - 149
  • [22] Laser ultrasonic guided wave methods for defect detection and materials characterisation
    Djordjevic, B. Boro (bbd@mast-inc.com), 1600, Inderscience Enterprises Ltd., 29, route de Pre-Bois, Case Postale 856, CH-1215 Geneva 15, CH-1215, Switzerland (09): : 338 - 347
  • [23] Numerical and experimental investigation of damage detection in stiffened composite panels using guided ultrasonic waves
    Tai, Steffen
    Kotobuki, Fumika
    Mal, Ajit
    Schaal, Christoph
    HEALTH MONITORING OF STRUCTURAL AND BIOLOGICAL SYSTEMS IX, 2020, 11381
  • [24] Selective generation of ultrasonic guided waves for damage detection in rectangular bars
    Serey, Valentin
    Quaegebeur, Nicolas
    Renier, Mathieu
    Micheau, Philippe
    Masson, Patrice
    Castaings, Michel
    STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL, 2021, 20 (03): : 1156 - 1168
  • [25] Defect imaging technique using guided waves and andtheir their diffuse fields in a plate-like structure
    Hayashi T.
    Zairyo/Journal of the Society of Materials Science, Japan, 2020, 69 (08) : 593 - 598
  • [26] Fatigue Crack Detection Using Guided Waves and Probability-Based Imaging Approach
    Lu, M.
    Lu, X.
    Zhou, L.
    Su, Z.
    Ye, L.
    Li, F.
    STRUCTURAL HEALTH MONITORING 2011: CONDITION-BASED MAINTENANCE AND INTELLIGENT STRUCTURES, VOL 1, 2011, : 282 - +
  • [27] Thermal damage detection in FRP-strengthened reinforced concrete structures using ultrasonic guided waves
    Cao, Yuqiao
    Jiang, Chang
    Ng, Ching Tai
    Smith, Scott T.
    NDT & E INTERNATIONAL, 2025, 152
  • [28] Non linear parametric imaging using an ultrasonic focused transducer
    Robin, Guillaume
    Vander Meulen, Francois
    Fortineau, Jerome
    Feuillard, Guy
    2011 IEEE INTERNATIONAL ULTRASONICS SYMPOSIUM (IUS), 2011, : 1080 - 1083
  • [29] Defect circumferential sizing by using long range ultrasonic guided wave focusing techniques in pipe
    Mu, J.
    Zhang, L.
    Rose, J. L.
    NONDESTRUCTIVE TESTING AND EVALUATION, 2007, 22 (04) : 239 - 253
  • [30] Defect sizing in pipe using an ultrasonic guided wave focusing technique
    Mu, J
    Zhang, L
    Rose, JL
    Spanner, J
    REVIEW OF PROGRESS IN QUANTITATIVE NONDESTRUCTIVE EVALUATION, VOLS 25A AND 25B, 2006, 820 : 760 - 766
12345