Effects of angular misalignment on the performance of rotor-bearing systems supported by externally pressurized air bearing

被引：50
作者：
Dal, Abdurrahim [1 ]
Karacay, Tuncay [1 ]
机构：
[1] Gazi Univ, Fac Engn, Dept Mech Engn, TR-06570 Ankara, Turkey
来源：
TRIBOLOGY INTERNATIONAL | 2017年 / 111卷
关键词：
Misalignment; Air bearings; Hybrid numerical solution method; LUBRICATION ANALYSIS; GAS;
D O I：
10.1016/j.triboint.2017.03.018
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
In this study, the performance of a rotor system supported by externally pressurized air bearing was investigated. Angular misalignment was introduced to the bearing along two perpendicular direction separately, and then both at the same time (combined). The effect of angular misalignment to the pressure distribution in the air bearing was obtained. A clearance function was introduced for misalignment conditions of the bearing, and then the air flow between the rotor and the bearing was modeled using Reynold's equation. Next this flow model was solved using Differential Transform and Finite Difference hybrid numerical solution method to obtain the pressure distribution in the bearing. The effects of the angular misalignment conditions on the load carrying capacity were also analyzed as well.
引用
收藏
页码：276 / 288
页数：13
相关论文
共 32 条
  • [1] [Anonymous], 1999, Rotordynamics of Gas-Lubricated Journal Bearing Systems
  • [2] Asanabe S, 1971, TRIBOLOGY CONVENTION, P1
  • [3] Ausman JS, 1960, ASME, V82, P335
  • [4] REVIEW OF NUMERICAL METHODS IN GAS BEARING FILM ANALYSIS
    CASTELLI, V
    PIRVICS, J
    [J]. JOURNAL OF LUBRICATION TECHNOLOGY, 1968, 90 (04): : 777 - &
  • [5] Influences of operational conditions and geometric parameters on the stiffness of aerostatic journal bearings
    Chen, Y. S.
    Chiu, C. C.
    Cheng, Y. D.
    [J]. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 2010, 34 (04): : 722 - 734
  • [6] Chundong X, 2015, J VIB ACOUST, V137
  • [7] Cunningham RE, 1971, NASATND6350 LEW RES
  • [8] Dimofte F., 1992, STLE ASME JOINT TRIB
  • [9] Dubois GB, 1957, ASME J BASIC ENG, V79, P1205
  • [10] Fisher A, 1922, OIL FLOW RING LUBRIC
1234