Control of Mg2Sn formation through ultrasonic-assisted transient liquid phase bonding of Mg to Al

被引：39

作者：

Li, Zhengwei ^{[1
]}

Xu, Zhiwu ^{[1
]}

Zhu, Dawei ^{[1
]}

Ma, Zhipeng ^{[2
]}

Yan, Jiuchun ^{[1
]}

机构：

[1] Harbin Inst Technol, State Key Lab Adv Welding & Joining, Harbin 150001, Heilongjiang, Peoples R China

[2] Northeast Petroleum Univ, Dept Mat Sci & Engn, Daqing 163318, Peoples R China

来源：

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY | 2018年 / 255卷

基金：

美国国家科学基金会;

关键词：

Ultrasonic; Transient liquid phase bonding; Intermetallic compound; Fracture; ALUMINUM-ALLOYS; MAGNESIUM ALLOY; MICROSTRUCTURE; INTERLAYER; SYSTEM; JOINT;

D O I：

10.1016/j.jmatprotec.2018.01.003

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The formation of Al/Mg intermetallic compounds (IMCs) of Al3Mg2 and Al12Mg17 was successfully avoided through ultrasonic assisted transient liquid phase bonding Mg/Al using pure Sn interlayers. A new IMC of Mg2Sn formed in the joints. Different bonding parameters were used to control the formation of Mg2Sn. The optimum joint shear strength of 60.0 MPa was obtained at the temperature of 220 degrees C, ultrasonic power of Mode I and ultrasonic time of 4 s. The thickness of Mg2Sn should be depressed to less than 15% of the joint width. Joints were fractured through the Mg2Sn layer.

引用

页码：524 / 529

页数：6

共 13 条

[1] Joining of magnesium and aluminum via arc-assisted ultrasonic seam welding with Sn/Zn composite interlayer [J].

Dai, Xiangyu ;

Zhang, Hongtao ;

Zhang, Hongchang ;

Liu, Jihou ;

Feng, Jicai .

MATERIALS LETTERS, 2016, 178 :235-238

[2] Microstructure and mechanical properties of dissimilar inertia friction welding of 7A04 aluminum alloy to AZ31 magnesium alloy [J].

Guo, Wei ;

You, Guoqiang ;

Yuan, Guangyu ;

Zhang, Xiuli .

JOURNAL OF ALLOYS AND COMPOUNDS, 2017, 695 :3267-3277

[3] Ultrasonic-promoted rapid TLP bonding of fine-grained 7034 high strength aluminum alloys [J].

Guo, Weibing ;

Leng, Xuesong ;

Luan, Tianmin ;

Yan, Jiuchun ;

He, Jingshan .

ULTRASONICS SONOCHEMISTRY, 2017, 36 :354-361

[4] Dissimilar welding of A7075-T651 and AZ31B alloys by gas metal arc plug welding method [J].

Islam, M. R. ;

Ishak, M. ;

Shah, L. H. ;

Idris, S. R. A. ;

Meric, C. .

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2017, 88 (9-12) :2773-2783

[5] Effect of lap configuration on magnesium to aluminum friction stir lap welding assisted by external stationary shoulder [J].

Ji, Shude ;

Li, Zhengwei ;

Zhang, Liguo ;

Zhou, Zhenlu ;

Chai, Peng .

MATERIALS & DESIGN, 2016, 103 :160-170

[6] Joining Mg alloys with Zn interlayer by novel ultrasonic-assisted transient liquid phase bonding method in air [J].

Lai, Zhiwei ;

Chen, Xiaoguang ;

Pan, Chuan ;

Xie, Ruishan ;

Liu, Lei ;

Zou, Guisheng .

MATERIALS LETTERS, 2016, 166 :219-222

[7] Microstructure design and dissolution behavior between 2024 Al/Sn with the ultrasonic-associated soldering [J].

Li, Yuanxing ;

Leng, Xuesong ;

Cheng, Sheng ;

Yan, Jiuchun .

MATERIALS & DESIGN, 2012, 40 :427-432

[8] Effect of addition of Ce in Sn-30Zn solder on the structure and properties of the Mg/Al-brazed joint [J].

Liu, Liming ;

Zhang, Zhaodong ;

Liu, Fei ;

Wang, Zhi ;

Wang, Hongyang .

JOURNAL OF MATERIALS SCIENCE, 2013, 48 (05) :2030-2037

[9] Thermodynamic modeling of the Mg-Sn-Zn ternary system [J].

Meng, F. G. ;

Wang, J. ;

Liu, L. B. ;

Jin, Z. P. .

JOURNAL OF ALLOYS AND COMPOUNDS, 2010, 508 (02) :570-581

[10] Friction stir welding joint of dissimilar materials between AZ31B magnesium and 6061 aluminum alloys: Microstructure studies and mechanical characterizations [J].

Mohammadi, J. ;

Behnamian, Y. ;

Mostafaei, A. ;

Izadi, H. ;

Saeid, T. ;

Kokabi, A. H. ;

Gerlich, A. P. .

MATERIALS CHARACTERIZATION, 2015, 101 :189-207

← 1 2 →