Correlation between microstructure and nanomechanical properties of 9Cr-1Mo ferritic martensitic steel through instrumented indentation technique

被引：5

作者：

Sreepriya, T. ^{[1
]}

Mythili, R. ^{[1
,2
]}

Reddy, G. V. Prasad ^{[1
,2
]}

机构：

[1] IGCAR, HBNI, Kalpakkam 603102, Tamil Nadu, India

[2] IGCAR, Met & Mat Grp, Kalpakkam 603102, Tamil Nadu, India

来源：

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2022年 / 840卷

关键词：

Instrumented indentation; Nanoindentation technique; Microstructure; Ferritic steels; Stress-strain; Yield strength; VISCOPLASTIC MATERIAL PARAMETERS; MECHANICAL-PROPERTIES; FRACTURE-BEHAVIOR; LATH MARTENSITE; NANOINDENTATION; DEFORMATION; IDENTIFICATION; TEMPERATURE; IRRADIATION; EXTRACTION;

D O I：

10.1016/j.msea.2022.142985

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Instrumented indentation technique (IIT) has been used to probe the phase-specific nanomechanical properties of heat treated 9Cr 1Mo ferritic martensitic (P9) steel. P9 steel was subjected to austenitization treatment, followed by water quenching, normalizing, furnace cooling, and subsequently tempering. Quantitative TEM analysis showed systematic changes in microstructure with variation in cooling rate in aforementioned heat treatments. Instrumented indentation tests were carried out at room temperature with a spherical indenter for evaluating hardness and elastic modulus. The yield strength of the steel from the load-displacement curves of cyclic indentation tests has been derived using neural networking method and yield parameter calculations. The properties derived from IIT using these methods were also validated with tensile test results. This work aims at correlating the local mechanical response measured by IIT with microstructural changes due to different heat treatments, which would be useful to extract mechanical properties of materials with heterogeneous microstructure.

引用

页数：12

共 39 条

[1]

Ahmed Shibli, 2014, Coal Power Plant Materials and Life Assessment(Developments and Applications)

[2]

[Anonymous], 2014, STUDY TRANSFORMATION

[3]

ASTM International, 2010, STANDARD TEST METHOD, DOI [10.1520/E0112-13.1.4, DOI 10.1520/E0112-13.1.4]

[4]

Babu S.R., 2021, ONSET MARTENSITE AUT

[5] Representative Stress-Strain Curve by Spherical Indentation on Elastic-Plastic Materials [J].

Chang, Chao ;

Garrido, M. A. ;

Ruiz-Hervias, J. ;

Zhang, Zhu ;

Zhang, Le-le .

ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, 2018, 2018

[6] EFFECTS OF STRAIN-RATE AND TEMPERATURE ON TENSILE DEFORMATION AND FRACTURE-BEHAVIOR OF FORGED THICK-SECTION 9CR-1MO FERRITIC STEEL [J].

CHOUDHARY, BK ;

RAO, KBS ;

MANNAN, SL .

INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 1994, 58 (02) :151-160

[7] Tensile flow and work hardening behaviour of 9Cr-1Mo ferritic steel in the frame work of Voce relationship [J].

Christopher, J. ;

Choudhary, B. K. ;

Samuel, E. Isaac ;

Srinivasan, V. S. ;

Mathew, M. D. .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 528 (21) :6589-6595

[8] Effect of carbon content on microstructure and mechanical properties of dual phase steels [J].

de la Concepcion, Valeria L. ;

Lorusso, Hernan N. ;

Svoboda, Hernan G. .

INTERNATIONAL CONGRESS OF SCIENCE AND TECHNOLOGY OF METALLURGY AND MATERIALS, SAM - CONAMET 2013, 2015, 8 :1047-1056

[9] A review of analysis methods for sub-micron indentation testing [J].

Fischer-Cripps, AC .

VACUUM, 2000, 58 (04) :569-585

[10] Ion irradiation combined with nanoindentation as a screening test procedure for irradiation hardening [J].

Heintze, C. ;

Bergner, F. ;

Akhmadaliev, S. ;

Altstadt, E. .

JOURNAL OF NUCLEAR MATERIALS, 2016, 472 :196-205

← 1 2 3 4 →