Laser butt joining of Al2O3 ceramic plates metallized by friction stir welding

被引：5

作者：

Sonomura, Hirosuke ^{[1
]}

Katagiri, Kazuaki ^{[1
]}

Yamaguchi, Takuto ^{[1
]}

Tanaka, Keigo ^{[1
]}

Ozaki, Tomoatsu ^{[1
]}

Hasegawa, Yasunori ^{[1
]}

Tanaka, Tsutomu ^{[1
]}

Kakitsuji, Atsushi ^{[1
]}

机构：

[1] Osaka Res Inst Ind Sci & Technol, 7-1 Ayumino-2, Izumi, Osaka 5941157, Japan

来源：

CERAMICS INTERNATIONAL | 2022年 / 48卷 / 16期

关键词：

Laser butt joining; Brazing; Metallization; Al; 2; O; 3; ceramics; MICROSTRUCTURE; ALUMINA;

D O I：

10.1016/j.ceramint.2022.04.329

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Laser butt joining of Al2O3 ceramic plates was successfully achieved after metallization of the plate end surfaces with Mo by friction stir welding. This pretreatment technique conveniently afforded metallized Al2O3 ceramic plates with a high adhesive strength exceeding 7.16 MPa between the Mo film and the plate. Two pieces of Mo or Ni foil with a thickness of 20 mu m were then inserted between the metallized end surfaces and laser butt joining was performed. The tensile strengths of the butt joints obtained using Mo and Ni foil as the insert material reached 0.21 and 0.63 MPa, respectively.

引用

页码：23381 / 23386

页数：6

共 14 条

[11] Influence of ceramic substrate porosity and glass phase content on the microstructure and mechanical properties of metallized ceramics via an activated Mo-Mn method
Wang, Ling
Kang, Wen-tao
Gao, Peng-zhao
Liu, Xiao-pan
Rebrov, Evgeny, V
[J]. CERAMICS INTERNATIONAL, 2020, 46 (06) : 8244 - 8254
[12] Direct ink writing of aluminum-phosphate-bonded Al2O3 ceramic with ultra-low dimensional shrinkage
Xu, Xin
Zhang, Junyi
Jiang, Pan
Liu, Desheng
Jia, Xin
Wang, Xiaolong
Zhou, Feng
[J]. CERAMICS INTERNATIONAL, 2022, 48 (01) : 864 - 871
[13] Fabrication of alumina ceramics with functional gradient structures by digital light processing 3D printing technology
Zeng, Yong
Sun, Lijun
Yao, Haihua
Chen, Jimin
[J]. CERAMICS INTERNATIONAL, 2022, 48 (08) : 10613 - 10619
[14] Effect of organic fibers addition on digital light processing for Al2O3 porous ceramics
Zhao, Pengcheng
Hu, Kehui
Wang, Haoyuan
Li, Xinyi
Lu, Zhigang
[J]. CERAMICS INTERNATIONAL, 2021, 47 (16) : 23144 - 23152

← 1 2 →