Texture development in 304LN austenitic stainless steel during post-hot-axisymmetric compression

被引:1
作者
Rout, Matruprasad [1 ,2 ]
Singh, Shiv Brat [3 ]
Pal, Surjya K. [2 ]
机构
[1] Natl Inst Technol Tiruchirappalli, Dept Prod Engn, Tiruchirappalli, Tamil Nadu, India
[2] Indian Inst Technol Kharagpur, Dept Mech Engn, Kharagpur 721302, W Bengal, India
[3] Indian Inst Technol Kharagpur, Dept Met & Mat Engn, Kharagpur, W Bengal, India
关键词
Texture; EBSD; compression; post-deformation; stainless steel; ODF; fibre; recrystallisation; DYNAMIC RECRYSTALLIZATION; DEFORMATION-BEHAVIOR; ROLLING TEXTURE; EVOLUTION; MICROSTRUCTURE; ALLOY;
D O I
10.1177/0954405420978036
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
In the present work, 304LN austenitic stainless steel has been considered for the texture evolution study after the hot-deformation process. The axi-symmetric compression tests, with post-deformation isothermal holding at the same temperature, were performed at 900 degrees C, 1000 degrees C and 1100 degrees C with a strain rate of 0.1 s(-1). Texture evolution during the post-hot-deformation was studied through electron back scattered diffraction. Effect of temperature and holding time on texture evolution were studied. At low deformation temperature and lesser holding time 100 and 110 fibre textures were observed. At high deformation temperature and/or high holding time the texture becomes random. Texture intensity along alpha fibre, for all the temperatures, is chaotic whereas along beta and tau fibres it is uniform at low temperature and becomes chaotic with the increase in deformation temperature. Goss component was found to be a major texture component with significant amount of ND and RD rotated cube components.
引用
收藏
页码:1131 / 1143
页数:13
相关论文
共 50 条
[31]   Microstructure and texture evolution in austenitic stainless steel during low strain rate deformation at elevated temperature [J].
Matruprasad Rout ;
Shiv Brat Singh ;
Surjya Kanta Pal .
International Journal of Material Forming, 2020, 13 :605-621
[32]   A Comprehensive Study on Texture Development and Twin-Related Domain Evolution Following Hot Compression in a Super Austenitic Stainless Steel [J].
Babu, K. Arun ;
Athreya, C. N. ;
Mozumder, Yahya H. ;
Sarma, V. Subramanya ;
Mandal, Sumantra .
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2020, 51 (07) :3535-3551
[33]   Dynamic recrystallization and precipitation in high manganese austenitic stainless steel during hot compression [J].
Amir Momeni ;
Shahab Kazemi ;
Golam Ebrahimi ;
Alireza Maldar .
InternationalJournalofMineralsMetallurgyandMaterials, 2014, 21 (01) :36-45
[34]   Dynamic recrystallization and precipitation in high manganese austenitic stainless steel during hot compression [J].
Amir Momeni ;
Shahab Kazemi ;
Golam Ebrahimi ;
Alireza Maldar .
International Journal of Minerals, Metallurgy, and Materials, 2014, 21 :36-45
[35]   Microstructure and texture development during hot-compression of Ti5321 [J].
Gu, B. ;
Chekhonin, P. ;
Xin, S. W. ;
Liu, G. Q. ;
Ma, C. L. ;
Zhou, L. ;
Skrotzki, W. .
MATERIALS CHARACTERIZATION, 2021, 179 (179)
[36]   The role of tension-compression stress on TRIP and TWIP effects in a 201LN austenitic stainless steel [J].
Braga, Diogo Pedrino ;
Magalhaes, Danielle Cristina Camilo ;
Rubert, Jose Benaque ;
Beladi, Hossein ;
Della Rovere, Carlos Alberto ;
Kliauga, Andrea Madeira .
RESULTS IN ENGINEERING, 2025, 27
[37]   Microstructural evolution in 304 austenitic stainless steel during friction stir welding [J].
Kokawa, Hiroyuki ;
Park, Seung Hwan C. ;
Sato, Yutaka S. ;
Okamoto, Kazutaka ;
Hirano, Satoshi ;
Inagaki, Masahisa .
ADVANCED WELDING AND MICRO JOINING / PACKAGING FOR THE 21ST CENTURY, 2008, 580-582 :9-+
[38]   SMA, GTA and P-GMA dissimilar weld joints of 304LN stainless steel to HSLA steel; Part-2: hot corrosion kinetics [J].
Anant, Ramkishor ;
Dahiya, Jag Parvesh ;
Agrawal, B. P. ;
Ghosh, P. K. ;
Kumar, Ravindra ;
Kumar, Sudhir ;
Kumar, Kaushal .
MATERIALS RESEARCH EXPRESS, 2018, 5 (09)
[39]   Dynamic Recrystallization in Austenitic Stainless Steel during Hot Working with Decreasing Deformation Temperature [J].
Dolzhenko, P. ;
Tikhonova, M. ;
Sakai, T. ;
Belyakov, A. ;
Kaibyshev, R. .
MATERIALS PERFORMANCE AND CHARACTERIZATION, 2019, 8 (05) :808-820
[40]   Gradient Microstructure and Texture Formation in a Metastable Austenitic Stainless Steel during Cold Rotary Swaging [J].
Panov, Dmitrii ;
Kudryavtsev, Egor ;
Naumov, Stanislav ;
Klimenko, Denis ;
Chernichenko, Ruslan ;
Mirontsov, Vladimir ;
Stepanov, Nikita ;
Zherebtsov, Sergey ;
Salishchev, Gennady ;
Pertcev, Alexey .
MATERIALS, 2023, 16 (04)