共 50 条
Risk assessment of an oxygen-enhanced combustor using a structural model based on the FMEA and fuzzy fault tree
被引:22
|作者:
Chen, Zhen
[1
]
Wu, Xiaona
[2
]
Qin, Jianguo
[3
]
机构:
[1] Chinese Acad Sci, Inst Mech, Beijing 100190, Peoples R China
[2] Tianjin Univ, Sch Environm Sci & Engn, Tianjin 300072, Peoples R China
[3] East China Elect Power Inst, China Power Engn Consults Grp, Shanghai 200063, Peoples R China
基金:
中国国家自然科学基金;
关键词:
Risk assessment;
Semi-industrial combustor;
Structural model;
FMEA;
Fuzzy fault tree;
CONTROL-SYSTEM SYNTHESIS;
HAZOP ANALYSIS;
FAILURE MODE;
RELIABILITY;
EXPLOSION;
CONTROLLABILITY;
PLANTS;
TANKS;
FIRE;
SETS;
D O I:
10.1016/j.jlp.2014.10.004
中图分类号:
TQ [化学工业];
学科分类号:
0817 ;
摘要:
The oxygen-enhanced combustor has the advantages of high burning efficiency and low emissions. However, it should not be promoted for industrial use until its reliability and safety have been fully recognized. A new methodology is proposed to assess the risk of an oxygen-enhanced combustor using a structural model based on the FMEA and fuzzy fault tree. In addition, it is applied to a selected pilot semi-industrial combustor. To identify the hazard source comprehensively, the pilot is divided into four subsystems: the combustor subsystem, feed subsystem, ignition subsystem and exhaust subsystem. According to the operational parameters of flow (flow rate, temperature and pressure) and the component functions in different subsystems, the cause and effect matrix can be built using the structural model, and the relationship between the operational parameters and the effects of the change for the operational parameters on the system can be presented. Based on the results of cause and effect matrix, the FMEA can be built to describe the failed models and accident scenarios of the pilot. The main accident forms include leakage, injury, fire and explosion. Accordingly, with the severity and probability analysis of different accident forms, the fire and explosion accidents should be further accessed quantitatively using the fuzzy fault tree analysis. The fault trees can be obtained in accordance with the FMEA, and the qualitative assessments of the basic events can be collected by using expert scoring. A hybrid approach for the fuzzy set theory and weight analysis is investigated to quantify the occurrence probability of basic events. Then, the importance analysis of the fault trees, including the hazard importance of basic events and the cut set importance, is performed to help determine the weak links of the fire and explosion trees. Finally, some of the most effective measures are presented to improve the reliability and safety of the combustion system. (C) 2014 Elsevier Ltd. All rights reserved.
引用
收藏
页码:349 / 357
页数:9
相关论文