Resistance of Wood Treated with Iron Compounds against Wood-Destroying Decay and Mould Fungi

被引:12
作者
Aleinikovas, Marius [1 ]
Varnagiryte-Kabasinskiene, Iveta [1 ]
Povilaitiene, Aiste [1 ]
Silinskas, Benas [1 ]
Skema, Mindaugas [1 ]
Beniusiene, Lina [1 ]
机构
[1] Lithuanian Res Ctr Agr & Forestry, Inst Forestry, Liepu Str 1, LT-53101 Girionys, Kaunas District, Lithuania
关键词
wood modification; iron oxide; iron salt; tannins; decay test; mould test; NATURAL DURABILITY; CHEMICAL-COMPONENTS; CONIOPHORA-PUTEANA; BEECH WOOD; ROT FUNGI; GROWTH; PINE; HEARTWOOD; INSIGHTS; BACTERIAL;
D O I
10.3390/f12050645
中图分类号
S7 [林业];
学科分类号
0829 ; 0907 ;
摘要
Treatment of wood with various physical and chemical factors can change the number of wood parameters, which can also lead to changes in resistance to wood-destroying fungi. This study evaluates the effects of hydrothermal treatments (additives Fe2O3 or FeCl3 with and without commercial tannins, also without additives and fresh wood) on decay and mould fungi resistance of modified wood of Scots pine (Pinus sylvestris), Norway spruce (Picea abies), Douglas fir (Pseudotsuga menziesii), walnut (Juglans regia), and Norway maple (Acer platanoides). For wood samples, the resistance against wood decay fungi Trametes versicolor (white rot) and Coniophora puteana (brown rot) and the resistance against mould fungi Aspergillus niger and Penicillium sp. were assessed. The study findings showed that wood modified with iron compounds could cause a higher resistance to wood-destroying fungi. The weight losses of the modified and control wood, caused by T. versicolor and C. puteana, differed for coniferous and deciduous: the average weight loss of treated pine, spruce, and fir wood caused by C. puteana was higher than that caused by T. versicolor, while these differences on maple and walnut wood were not significant. The wood hydrothermal treatment with Fe2Cl3 with and without tannins significantly reduced the weight loss caused by T. versicolor and C. puteana, and the treatment with Fe2O3 slightly improved the decay resistance. For the wood, hydrothermally modified with FeCl3 and FeCl3 + tannins, the mould area for both tested Aspergillus niger and Penicillium sp. was smallest for the wood of all tested tree species compared to other treatments. A different response was obtained for coniferous and deciduous tree species wood. The spruce wood, followed by fir wood, treated with FeCl3 with and without tannins, was the most resistant against the mould fungi. Relatively low resistance against the mould fungi was fixed for the maple wood treated by various iron compounds, except the treatment with Fe2O3 + tannins, which gave a very positive response against the Penicillium sp.
引用
收藏
页数:15
相关论文
共 64 条
[1]  
Adan OCG, 2011, FUNDAMENTALS OF MOLD GROWTH IN INDOOR ENVIRONMENTS AND STRATEGIES FOR HEALTHY LIVING, P41
[2]  
[Anonymous], 1994, 9440032 IRGWP
[3]  
[Anonymous], 2006, WOOD MODIFICATION CH
[4]  
[Anonymous], 2007, 15457 EN
[5]   The role of extractives in the natural durability of the heartwood of Dicorynia guianensis Amsh: new insights in antioxydant and antifungal properties [J].
Anouhe, Jean-Baptiste Say ;
Niamke, Florence Bobele ;
Faustin, Milcard ;
Virieux, David ;
Pirat, Jean-Luc ;
Adima, Augustin Amissa ;
Kati-Coulibaly, Seraphin ;
Amusant, Nadine .
ANNALS OF FOREST SCIENCE, 2018, 75 (01)
[6]   DETERMINATION OF DECAY RESISTANCE AGAINST Pleurotus ostreatus AND Coniophora puteana FUNGUS OF HEAT-TREATED SCOTCH PINE, OAK AND BEECH WOOD SPECIES [J].
Ayata, Umit ;
Akcay, Caglar ;
Esteves, Bruno .
MADERAS-CIENCIA Y TECNOLOGIA, 2017, 19 (03) :309-316
[7]  
Baughman AV, 1996, ASHRAE TRAN, V102, P193
[8]  
Boonstra MJ, 2007, ANN FOREST SCI, V64, P679, DOI 10.1051/forest:2007048
[9]  
Cao YJ, 2011, BIORESOURCES, V6, P4696
[10]   Evaluation of the Effect of Thermo-mechanical Treatment on the Resistance of Commercial OSB to Decay Fungi [J].
Crisostomo, Matheus Couto ;
Soares Del Menezzi, Claudio Henrique .
MATERIALS SCIENCE-MEDZIAGOTYRA, 2019, 25 (02) :190-194