Estimation of mortars compressive strength at different curing temperature by the maturity method

被引：32

作者：

Boubekeur, Toufik ^{[1
,2
]}

Ezziane, Karim ^{[2
]}

Kadri, El-Hadj ^{[3
]}

机构：

[1] Univ Tissemssilt, Tissemsilt, Algeria

[2] Univ Hassiba Benbouali Chlef, Lab LaG, Chlef 0200, Algeria

[3] Cergy Pontoise Univ, Lab L2MGC, F-95031 Cergy Pontoise, France

来源：

CONSTRUCTION AND BUILDING MATERIALS | 2014年 / 71卷

关键词：

Cement; Compressive strength; Later age; Maturity; Mineral addition; Mortar; Temperature; MECHANICAL-PROPERTIES; PORTLAND-CEMENT; MICROSTRUCTURE; HYDRATION; CONCRETE; PASTES; METAKAOLIN; PRODUCTS; SILICATE; TIME;

D O I：

10.1016/j.conbuildmat.2014.08.084

中图分类号：

TU [建筑科学];

学科分类号：

0813 ;

摘要：

Two set of mortars were made with three mineral additions to verify the relationship between compressive strength and maturity at later age. One cured in steam room at constant temperature of 20, 30, 40 and 50 c and the second cured under variable temperature history. It was found that a limited maturity index of 350 C days exists beyond which the relationship between strength and maturity is not unique. The newly proposed maturity index allows a better correlation between strength and maturity at later age and takes into consideration the deterioration of microstructure with temperature rise. Later age strength can be predicted using the relationship strength-maturity at early age with a correlation coefficient ranging from 0.89 to 0.98. (C) 2014 Elsevier Ltd. All rights reserved.

引用

页码：299 / 307

页数：9

共 50 条

[41] Compressive Strength Performance of Alkali Activated Concretes under Different Curing Conditions
Nis, Anil
Altindal, Ilhan
PERIODICA POLYTECHNICA-CIVIL ENGINEERING, 2021, 65 (02): : 556 - 565
[42] An approach to improve compressive strength of cement paste at low temperature by carbonation curing
Jiang, Lei
Wu, Qian
Huo, Zhen
Zhu, Zheyu
Wu, Fengshun
Lu, Bao
CONSTRUCTION AND BUILDING MATERIALS, 2023, 365
[43] Improvement of Compressive Strength Cementitious Composites in Different Curing Media by Incorporating ZrO2 Nanoparticles
Rafieipour, Mohammad Hossein
Nazari, Ali
Mohandesi, Mohammad Ali
Khalaj, Gholamreza
MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS, 2012, 15 (02): : 177 - 184
[44] INFLUENCE OF VISCOSITY ENHANCING AGENT ON RHEOLOGY AND COMPRESSIVE STRENGTH OF SUPERPLASTICIZED MORTARS
Golaszewski, Jacek
JOURNAL OF CIVIL ENGINEERING AND MANAGEMENT, 2009, 15 (02) : 181 - 188
[45] The Influence of Different Curing Conditions on Compressive Strength Development of Concrete
Liu Ming-hui
Wang Yuan-feng
CIVIL ENGINEERING IN CHINA - CURRENT PRACTICE AND RESEARCH REPORT, 2010, : 247 - 252
[46] Influence of compressive strength and maturity conditions on shrinkage of ordinary concrete
Szlachetka, Olga
Witkowska-Dobrev, Joanna
Dohojda, Marek
Cala, Anna
ADVANCES IN MECHANICAL ENGINEERING, 2021, 13 (06)
[47] Influence of water-to-binder ratio on the optimum percentage of nanoTiO2 addition in terms of compressive strength of mortars: A laboratory and virtual experimental study based on ANN model
Moro, Carlos
El Fil, Hala
Francioso, Vito
Velay-Lizancos, Mirian
CONSTRUCTION AND BUILDING MATERIALS, 2021, 267
[48] Combined effect of nano-SiO2 and nano-Fe2O3 on compressive strength, flexural strength, porosity and electrical resistivity in cement mortars
Sanjuan, M. A.
Argiz, C.
Galvez, J. C.
Reyes, E.
MATERIALES DE CONSTRUCCION, 2018, 68 (329)
[49] Effects of binder component and curing regime on compressive strength, capillary water absorption, shrinkage and pore structure of geopolymer mortars
Wu, Hongbo
He, Mingsheng
Wu, Shenghong
Cheng, Jianjun
Wang, Tao
Che, Yali
Du, Yongkun
Deng, Qiuye
CONSTRUCTION AND BUILDING MATERIALS, 2024, 442
[50] Activation Energy for the Concrete Maturity Model - Part 1: Compressive Strength Tests at Different Curing Temperatures
Nielsen, Claus Vestergaard
Kaasgaard, Martin
NORDIC CONCRETE RESEARCH, 2020, 62 (01): : 87 - 106

← 1 2 3 4 5 →