Tribological Behavior of NiAl-1.5 wt% Graphene Composite Under Different Velocities

被引:17
作者
Ibrahim, Ahmed Mohamed Mahmoud [1 ]
Shi, Xiaoliang [1 ]
Zhai, Wenzheng [1 ]
Yao, Jie [1 ]
Xu, Zengshi [1 ]
Cheng, Long [1 ]
Zhu, Qingshuai [1 ]
Xiao, Yecheng [1 ]
Zhang, Qiaoxin [1 ]
Wang, Zhihai [1 ]
机构
[1] Wuhan Univ Technol, Sch Mech & Elect Engn, Wuhan 430070, Peoples R China
基金
中国国家自然科学基金;
关键词
Solid Lubricants; Self-Lubrication Friction; Solid Lubrication Wear; Self-Lubrication; DRY SLIDING WEAR; COMPRESSIVE PROPERTIES; ABRASIVE WEAR; FRICTION; MICROSTRUCTURE; LUBRICANT; SHEETS; ALLOY; HIP;
D O I
10.1080/10402004.2014.931500
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
The progress in aerospace field requires a new NiAl matrix composite that can stand against wear and decrease the energy dissipation through decreasing friction. In this study, the tribological behavior of NiAl-1.5 wt% graphene composite is investigated at room temperature under a constant load of 12 N and different sliding velocities. The results show that the friction coefficient and wear rate increase with increasing sliding velocity from 0.2 to 0.4 m/s due to the adhesion between the sliding bodies and tearing of the graphene layer. The friction coefficient and wear rate tend to decrease at a sliding velocity of 0.6 m/s as a result of severe plastic deformation and grain refinement of the worn surface. However, at 0.8 m/s the friction coefficient reaches a minimum value and the wear rate increases and changes the wear mechanism to fatigue wear. It can be concluded that various wear mechanisms lead to different tribological performance of NiAl-1.5 wt% graphene composite.
引用
收藏
页码:1044 / 1050
页数:7
相关论文
共 39 条
[1]  
[Anonymous], 2001, B96213 ASTM
[2]  
ASTM, 2003, ASTM E92-82e2
[3]   Few layer graphene to reduce wear and friction on sliding steel surfaces [J].
Berman, Diana ;
Erdemir, Ali ;
Sumant, Anirudha V. .
CARBON, 2013, 54 :454-459
[4]  
Choudhary S, 2012, J MATER CHEM, V22, P21032, DOI [10.1039/c2jm34741, 10.1039/c2jm34741e]
[5]   Study on Mechanical and Dry Sliding Wear Characteristics of Meta-Cresol Novalac Epoxy Composites Filled with Silicon Carbide, Aluminum Oxide, and Zinc Oxide Particulates [J].
Dass, Kali ;
Chauhan, S. R. ;
Gaur, Bharti .
TRIBOLOGY TRANSACTIONS, 2014, 57 (02) :157-172
[6]   Structural and frictional properties of graphene films on SiC(0001) studied by atomic force microscopy [J].
Filleter, T. ;
Bennewitz, R. .
PHYSICAL REVIEW B, 2010, 81 (15)
[7]   Friction and Dissipation in Epitaxial Graphene Films [J].
Filleter, T. ;
McChesney, J. L. ;
Bostwick, A. ;
Rotenberg, E. ;
Emtsev, K. V. ;
Seyller, Th. ;
Horn, K. ;
Bennewitz, R. .
PHYSICAL REVIEW LETTERS, 2009, 102 (08)
[8]  
Guo J.T., 2003, ORDER INTERMETALLIC
[9]  
GUPTA BK, 1994, LUBR ENG, V50, P524
[10]   Abrasive wear behavior of NiAl and NiAl-TiB2 composites [J].
Hawk, JA ;
Alman, DE .
WEAR, 1999, 225 :544-556