Microstructure and mechanical properties of AA7075(T6) hybrid laser/GMA welds

被引：89
作者：
Hu, B. [1 ]
Richardson, I. M. [1 ]
机构：
[1] Delft Univ Technol, Dept Mat Sci & Engn, Netherlands Inst Met Res, NL-2628 CD Delft, Netherlands
来源：
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2007年 / 459卷 / 1-2期
关键词：
AA7075; hybrid laser/GMA; microstructure; mechanical property; solution heat treatment;
D O I：
10.1016/j.msea.2006.12.094
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The weldability of AA7075 using a hybrid laser/gas metal arc (GMA) welding process was examined. After welding process optimisation, the influence of filler wire composition, natural ageing, artificial ageing and a short duration solution heat treatment was investigated to enhance weld microstructural and mechanical properties. Results show that after a short solution heat treatment, a large fraction of the dendrite boundaries in the weld fusion zone dissolved in the primary phase. Tensile tests and micro-hardness tests show that the weld has a comparable strength to the T6 base alloy when welding with an AA2319 consumable. Fracture surfaces observed under a scanning electron microscope indicate a large number of fine ductile type voids and larger sized dimples. The improved ductility of the weld together with the strength comparable to the base alloy make the weld more formable than none solution heat-treated welds. (C) 2007 Elsevier B.V. All rights reserved.
引用
收藏
页码：94 / 100
页数：7
相关论文
共 15 条
[1]  
[Anonymous], 1993, ASM INT
[2]  
BEHLER K, 2000, IV7772000 IIW
[3]   A process model for the heat-affected zone microstructure evolution in Al-Zn-Mg weldments [J].
Bjorneklett, BI ;
Grong, O ;
Myhr, OR ;
Kluken, AO .
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1999, 30 (10) :2667-2677
[4]  
Cross C.E., 2003, HDB ALUMINUM, V1
[5]  
DILTHEY U, 1999, ALUMINIUM, V75, P64
[6]   Mechanism and possible solution for transverse solidification cracking in laser welding of high strength aluminium alloys [J].
Hu, B. ;
Richardson, I. M. .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2006, 429 (1-2) :287-294
[7]   Autogenous laser keyhole welding of aluminum alloy 2024 [J].
Hu, B ;
Richardson, IM .
JOURNAL OF LASER APPLICATIONS, 2005, 17 (02) :70-80
[8]  
HU B, 2005, P ICALEO 05 MIAM US
[9]  
HU B, 2002, THESIS DELFT U TECHN
[10]   The study on microstructural and mechanical properties of weld heat affected zone of 7075-T651 aluminum alloy [J].
Hwang, RY ;
Chou, CP .
SCRIPTA MATERIALIA, 1997, 38 (02) :215-221
12