Analysis of the Structure, Phase Composition and Mechanical Properties of a Tubular Welded Joint from Refractory Alloy HP40NbTi

被引:2
作者
Kondrat'ev, S. Yu. [1 ]
Fuks, M. D. [2 ]
Frolov, M. A. [1 ,2 ]
Petrov, S. N. [1 ,2 ]
机构
[1] Peter Great St Petersburg Polytech Univ, St Petersburg, Russia
[2] Natl Res Ctr, Kurchatov Inst, Cent Res Inst Struct Mat Prometey, St Petersburg, Russia
关键词
refractory austenitic alloys; welded joint; microstructure; phase composition; G-phase; mechanical properties; PYROLYSIS FURNACES; LIFE ASSESSMENT; CAST; TEMPERATURE; TUBES; MICROSTRUCTURE; NB; TRANSFORMATIONS; AUSTENITE; KINETICS;
D O I
10.1007/s11041-021-00622-8
中图分类号
TF [冶金工业];
学科分类号
0806 ;
摘要
The methods of optical and electron microscopy and x-ray spectrum microanalysis are used to study the microstructure and phase composition of a tubular welded joint from alloy HP40NbTi based on the Fe - 25Cr - 35Ni system. Short-term and long-term mechanical properties of the alloy are determined. The joint is characterized by structural inhomogeneity and formation of silicon segregations and G-phase in the structure of the metal in the heat-affected zone. It is shown that the special features of the structure of the welded joint from alloy HP40NbTi lower considerably its mechanical properties at the operating temperatures of pyrolysis facilities.
引用
收藏
页码:677 / 688
页数:12
相关论文
共 41 条
  • [21] Effect of Heat Treatment on the Structure and Mechanical Properties of the Solid-Phase VT6 Alloy Welded Joint with an Ultrafine-Grained VT22 Alloy Interlayer
    M. Kh. Mukhametrakhimov
    [J]. Russian Metallurgy (Metally), 2022, 2022 : 391 - 395
  • [22] Effect of Heat Treatment on the Structure and Mechanical Properties of the Solid-Phase VT6 Alloy Welded Joint with an Ultrafine-Grained VT22 Alloy Interlayer
    Mukhametrakhimov, M. Kh.
    [J]. RUSSIAN METALLURGY, 2022, 2022 (04): : 391 - 395
  • [23] Investigation of structure, phase composition, and mechanical properties of Zr-2.5% Nb alloy after ECAP
    Nikulin, S. A.
    Rozhnov, A. B.
    Rogachev, S. O.
    Khatkevich, V. M.
    Turchenko, V. A.
    Khotulev, E. S.
    [J]. MATERIALS LETTERS, 2016, 169 : 223 - 226
  • [24] Effect of an Overequilibrium Nitrogen Content on the Structure, Phase Composition, and Mechanical Properties of Low-Alloy Steel
    M. V. Kostina
    L. G. Rigina
    S. O. Muradyan
    S. A. Krylov
    A. A. Makarov
    M. A. Druzhnov
    V. S. Kostina
    A. E. Kudryashov
    [J]. Russian Metallurgy (Metally), 2021, 2021 : 1060 - 1074
  • [25] Effect of an Overequilibrium Nitrogen Content on the Structure, Phase Composition, and Mechanical Properties of Low-Alloy Steel
    Kostina, M., V
    Rigina, L. G.
    Muradyan, S. O.
    Krylov, S. A.
    Makarov, A. A.
    Druzhnov, M. A.
    Kostina, V. S.
    Kudryashov, A. E.
    [J]. RUSSIAN METALLURGY, 2021, 2021 (09): : 1060 - 1074
  • [26] An Assessment of the Mechanical Properties and Microstructural Analysis of Dissimilar Material Welded Joint between Alloy 617 and 12Cr Steel
    Ahmad, HafizWaqar
    Hwang, Jeong Ho
    Lee, Ju Hwa
    Bae, Dong Ho
    [J]. METALS, 2016, 6 (10):
  • [27] Structure, Phase Composition, and Mechanical Properties of an Fe–20Cr–1.5V–1.5Zr Alloy Subjected to High-Temperature Nitriding
    S. O. Rogachev
    V. M. Khatkevich
    [J]. Russian Metallurgy (Metally), 2021, 2021 : 1345 - 1351
  • [28] Evolution of Microstructure and Mechanical Properties of Welded Joints from Refractory Alloy Cr35Ni45Nb during Service
    Jingfeng Guo
    Xiaoming Zhang
    Chunxiu Li
    Wenwen Liu
    Zhaogang Zhang
    [J]. Metal Science and Heat Treatment, 2021, 63 : 375 - 379
  • [29] Effect of the Time–Temperature Parameters of Step Aging on the Structure, Phase Composition, and Mechanical and Corrosion Properties of Grade 1441 Alloy Sheets
    V. V. Antipov
    Yu. S. Oglodkova
    A. A. Selivanov
    E. A. Lukina
    D. V. Zaitsev
    [J]. Russian Metallurgy (Metally), 2020, 2020 : 1251 - 1259
  • [30] Influence of Quenching Temperature on the Structure, Phase Composition, Physical and Mechanical Properties of a High-Strength Titanium Alloy of the Martensitic Class
    Illarionov, A. G.
    Demakov, S. L.
    Illarionova, S. M.
    Kicherov, D. A.
    Popov, A. A.
    [J]. METAL SCIENCE AND HEAT TREATMENT, 2024, 66 (5-6) : 390 - 395