Strengthening of ice with basalt materials

被引:11
作者
Buznik, V. M. [1 ,2 ]
Goncharova, G. Yu. [3 ,4 ]
Grinevich, D. V. [1 ]
Nuzhny, G. A. [1 ]
Razomasov, N. D. [3 ,4 ]
Turalin, D. O. [3 ]
机构
[1] FSUE All Russian Sci Res Inst Aviat Mat SSC RF, Moscow 105005, Russia
[2] Natl Res Tomsk State Univ, Tomsk 634050, Russia
[3] Bauman Moscow State Tech Univ, BMSTU, Moscow 105005, Russia
[4] Russian Acad Sci, All Russian Sci Res Inst Refrigerat Ind, Branch VM, Gorbatov Fed Res Ctr Food Syst, Moscow 127422, Russia
基金
俄罗斯基础研究基金会; 俄罗斯科学基金会;
关键词
Arctic materials; Ice composite materials; Basalt; Reinforcement; Chemical modification of ice; Strength;
D O I
10.1016/j.coldregions.2022.103490
中图分类号
X [环境科学、安全科学];
学科分类号
08 ; 0830 ;
摘要
Practical approaches to controlling the strength and deformation properties of ice reinforced with basalt materials (rovings, fibres and nets) and/or modified by dopants of various groups are discussed in this paper. To carry out the entire research on the strength and deformation properties, approximately a thousand of ICMs samples were produced and tested. The three-point bending tests of ice beams and the compression tests of ice cylinders were carried out by authors. It was shown that the introduction of basalt rovings significantly improves the strength and deformation properties of freshwater ice. Ice reinforcement modifies the mechanism of cracks propagation and the overall nature of the specimens' failure. The major morphological and topological factors involved in the manufacture process of high strength ice composite materials were revealed. A combination of basalt rovings reinforcement and chemical modification of the ice matrix with dopants increases the strength properties of the tested ICM specimens by 4-6 times compared to freshwater ice samples. Based on collected experimental data the corresponding recommendations on the choice of reinforcement parameters are given dependent on the functional purpose of the ice composites being implemented.
引用
收藏
页数:13
相关论文
共 30 条
  • [21] Compression Features of Ice Composite Materials with Natural Reinforcing Fillers
    Nuzhnyi G.A.
    Cherepanin R.N.
    Buznik V.M.
    Grinevich D.V.
    Landik D.N.
    [J]. Inorganic Materials: Applied Research, 2020, 11 (1) : 103 - 108
  • [22] Mechanical properties of ice and snow
    Petrovic, JJ
    [J]. JOURNAL OF MATERIALS SCIENCE, 2003, 38 (01) : 1 - 6
  • [23] PlastiComp Inc, 2021, DES CONS SUCC US LON
  • [24] The 2017-18 design and construction of ice composite structures in Harbin
    Pronk, Arno
    Mistur, Mark
    Li, Qingpeng
    Liu, Xiuming
    Blok, Rijk
    Liu, Rui
    Wu, Yue
    Luo, Peng
    Dong, Yu
    [J]. STRUCTURES, 2019, 18 : 117 - 127
  • [25] Schulson E., 2009, CREEP FRACTURE ICE
  • [26] ON THE TEST METHODS FOR MODEL ICE
    TIMCO, GW
    [J]. COLD REGIONS SCIENCE AND TECHNOLOGY, 1981, 4 (03) : 269 - 274
  • [27] A review on the development of reinforced ice for use as a building material in cold regions
    Vasiliev, N. K.
    Pronk, A. D. C.
    Shatalina, I. N.
    Janssen, F. H. M. E.
    Houben, R. W. G.
    [J]. COLD REGIONS SCIENCE AND TECHNOLOGY, 2015, 115 : 56 - 63
  • [28] Vasiliyev N.K., 2013, VESTNIK NGU MMI, V13, P31
  • [29] Vasilyev A., 2019, FAR E FEDERAL U SCH, V3, P3, DOI 10.24866/2227-6858/2019-3-1
  • [30] Wu Z., 2020, Handbook of Natural Fibres, P433, DOI [10.1016/B978-0-12-818398-4.00015-3, DOI 10.1016/B978-0-12-818398-4.00015-3]